meinnovations's latest activity
-
Mmeinnovations replied to the thread Penetrating Oils Info.Has anyone seen a comparison with kubota's penetrating oil? My shop swears by it. Comes in a 15oz aerosol can for $11.44+tax. They said...
-
-
MI ran into this years ago. I can vouch for the atf/acetone mix. I use kano kroil. But the atf/acetone is really great. Just...
-
MAs a retired Toolmaker/Research Technician, that is exactly the ranking order I would have placed them from my experience, but I have...
-
MSaw this on another site and thought that some here might be interested. Penetrating Oils **** > Machinist's Workshop magazine...
-
Mmeinnovations replied to the thread frozen backhoe pins.What ATF do you recommend?
-
MACE = acetone (highly flammable) ATF is transmission fluid I have had very good luck with PB Blaster.
-
Mmeinnovations replied to the thread frozen backhoe pins.Pipe wrench was a good idea. Multiple Liquid Wrench applications over days and wouldn't budge with a sledgehammer on the wrench.
-
Mmeinnovations replied to the thread frozen backhoe pins.WD-40 was a red herring. I applied Liquid Wrench liberally 4 days in a row, tapped, jiggled the outriggers and bucket. I assume ATF is...
-
Mmeinnovations replied to the thread frozen backhoe pins.You're right. I was focused on the pins moving and didn't note the flange deflection as I jacked. The pins are so frozen on the outboard...
-
-
Mmeinnovations replied to the thread frozen backhoe pins.I appreciate all the great ideas here. I ground off the ends of the retention pins to remove them and applied 10T porta power to push...
-
-
MThe generic term is port-a-power. Not a Kubota thing.
-
Mmeinnovations replied to the thread frozen backhoe pins.Is this a Kubota tool? name and part #? other tool?
-
MHi, the saga continues with my L3240. I need to remove the backhoe to get to the rear transmission seal, but there's so much corrosion...
-
-
MI have a B8200 HST that appears to have hydro problems. The tractor will move in low range both forward and reverse, but . when in high...
-
Mmeinnovations reacted to TheOldHokie's post in the thread Ping sound and palpable pop on dipper after operating with
Like.
Off the top of my head the noise is caused by a gradual leakdown of boom and/or dipperstick cylinders. Dan
