Mark_BX25D's latest activity
-
Mark_BX25D replied to the thread BX22 Temp Gauge.How's the continuity on the wire? Are you getting the correct voltage to the meter connection? Ooops. You can't test that until you... -
Ever try to buy a snowblower during a blizzard?
-
If you DON'T get one, it will snow TONS. And vice-versa.
-
Mark_BX25D replied to the thread kubota OBDII Adapter.Trying to use an OBDII scanner on a tractor is not like apples and oranges. It's more like apples and alley cats.
-
Mark_BX25D reacted to Hugo Habicht's post in the thread So my L3901 started blowing fuses and just shutting down. The 20 amp fuse blew along with the 5 amp fuse that controls the start up safety switches e with
Like.
How did you check the switches? The fuse blowing would typically be a short to ground of one of the wires that carry 12V. The switch... -
Mark_BX25D replied to the thread Mixing in leftover quarter-minus gravel into existing gravel driveway?.Agreed. Since you are going to do a major makeover in the spring, just spread what you have and call it a day. It will all get mixed...
-
Mark_BX25D reacted to Shawn T. W's post in the thread Mixing in leftover quarter-minus gravel into existing gravel driveway? with Like.
Yeah, I'd use it up!
-
Mark_BX25D replied to the thread Ultimate [[HELP ME]] RE: Rules, Manuals, Hints, DIY and more.Never never never never ever put your phone number or your email address or any other personal information in plain sight on ANY...
-
Yes if a site that says they have Downloadable WSM's and they want you to download a reader or any other program first, get off the site...
-
The land pride mode I purchased with the BX had two options for shoes. Just went with the plate skid shoes that were on the blower v...
-
You will not get a non kubota computer system to be able to read or reset the codes, they do not follow standard OBDII programing. You...
-
OBD2 is federal mandate for on-road vehicles, tractor manufacturers do not have to comply and may have proprietary systems for diagnostics.
-
Mark_BX25D replied to the thread Replacement Backhoe Bucket..Might that work with the BXpanded quick attach?
-
A little hardware cloth covered with JB Weld should patch up that little gap in no time! ;)
-
Here is the final damage. I should have stopped when I first noticed the problem.