LeanGreenMan's latest activity
-
LLeanGreenMan replied to the thread Kubota L35 Hard Starting When Cold.Another update: Post office lost, then found, the replacement gasket for the top cover. I hadn't been running it so as to not make a...
-
LLeanGreenMan replied to the thread Kubota L35 Hard Starting When Cold.Will do and will report back.
-
LLeanGreenMan replied to the thread Kubota L35 Hard Starting When Cold.L35 started up fine this morning after sitting over night. Problem is probably solved. I've decided to order a new gasket and see if...
-
LLeanGreenMan replied to the thread Kubota L35 Hard Starting When Cold.Well, color me dumb. I assumed, as the injection lines are POST injection pump, that I wouldn't need to bleed anything before the lines...
-
LLeanGreenMan replied to the thread Kubota L35 Hard Starting When Cold.https://youtube.com/shorts/B30DH3MqOsY?feature=share
-
LLeanGreenMan replied to the thread Kubota L35 Hard Starting When Cold.Alright all. Another update. First off, I can turn the engine over by hand with a box end wrench on those bolts that connect the crank...
-
LLeanGreenMan replied to the thread Kubota L35 Hard Starting When Cold.Understood. Pretty sure this is mechanical like my 7.3 IDI, I'll bleed it to be safe.
-
LLeanGreenMan replied to the thread Kubota L35 Hard Starting When Cold.Okay. Valves are all adjusted to 0.008 which falls right in the middle of the recommended range. I didn't check the looseness of any but...
-
LLeanGreenMan replied to the thread Kubota L35 Hard Starting When Cold.Unfortunately that is exactly what I have been doing. I stuck a box end wrench on one of the bolts on the coupling and I have been...
-
LLeanGreenMan replied to the thread Kubota L35 Hard Starting When Cold.Glow plugs are out, I did try turning the fan, but the belt is just spinning on the crank down below. I was hoping to be able to stick a...
-
LLeanGreenMan replied to the thread Kubota L35 Hard Starting When Cold.Okay, I now have the feeler gauge to check valve clearance. I plan to use the EO/IC method. Next up, Wolfman, I will pull the injectors...
-
LLeanGreenMan reacted to North Idaho Wolfman's post in the thread Kubota L35 Hard Starting When Cold with
Like.
You can get an injection port adapter in easier than a glow plug adapter. I think you have three / four / issues all causing your hard... -
LI was thinking Cripple Creek. I just googled towns in CO with 9500 elevation and picked the closest to me. I didn't want to name the...
-
LLeanGreenMan replied to the thread Kubota L35 Hard Starting When Cold.Haha I'm assuming you're talking about BlackHawk... we're up in Leadville.
-
LLeanGreenMan replied to the thread Kubota L35 Hard Starting When Cold.Okay, thank you for the explanation. After adjusting the valves, if there is no change, I will order a compression tester next...