L35's latest activity
-
L35 replied to the thread Am I stuck with R4’s?.I was going to put away the Kubota after plowing this am and was going downhill that had a slight passenger side lean as well, almost... -
-
The more I used the siping tool the more I wanted to continue using it. It's very satisfying running that hot blade through a lug and...
-
L35 replied to the thread Am I stuck with R4’s?.they were on my machine when I bought it used in 2008 so I cant say exactly. It had around 720ish hours on it then and around 1300 now...
-
Those tires on mcmxi's ride, looks more like R14's than R4's! They look awesome!
-
I don't think I'd want to go any narrower. Those little front tires leave ruts already.
-
Here they are ... front and back. There are many examples on this forum of siped R4s but this is the direction I went in. Traction on...
-
If you want to keep the sidewall strength stay with the R4 and sipe the snot out of them! That's what I would do with a TLB. ;) Have...
-
I'm pretty sure you can safely run these, they are just a little narrower: You can go on goodyear and get the RC values and make sure...
-
Go to a local large truck and heavy equipment tire shop. They can source about anything in any size made.
-
The new Titan trac loader II comes in the front size, it is a r4 but much better tread design
-
https://www.gallaghertire.com/goodyear-r14t-rear-tl-r4t373ge.html?srsltid=AfmBOorFoXOdn-rYThQMpXeEjQkIfVdrE3rho4XwHANAiLUsjcVhuazP
-
From what I read a bit ago, the point of the R14s is to replace R1s or R4s. So, some company might make R14s, but it could be some work...
-
titan makes the 15x19.5 in a r14, that is what came on my L2501
-
L35 replied to the thread Am I stuck with R4’s?.I figure I can put those on my rims but was thinking they would be “straight up” from the bead, no bulge like I have now making the edge...
-
L35 replied to the thread Am I stuck with R4’s?.I have trac loaders now, not the new design. They have held up well considering the abuse haha
