Recent content by kubotabee

The filler plug is located just between your legs when you are sitting on the machine and just behind that is the dipstick with a rubber knob about 2" long. Best to replace the all UDT fluid and the screen filter too... The filter screen removal will result in all the UDT fluid draining out of...

Hi Tractorwerx.... Did you check the bearings when you replaced the seal? There may be a bushing with an O ring inside it too....so take it apart and replace those bearings while you are in there. :)Also, running 80 weight Hypoid is a good thing to do for the front axle instead of UDT...

Yep....well said Aquaforce. I have just changed my L305DT's hydraulic oil and put in a Kubota approved hydraulic fluid...a pail and a half roughly. My shop manual said to use 80 weight gear oil...not gonna do it! The local Kubota mechanic said that his father had a Kubota where he used 80...

My experience has been that when you see a spark when reconnecting cables to the battery, it is for certain that current is being drawn....hence you have a battery that is being drained. So, I would think that you could very likely suspect the starter. If no fuses are being blown, then the...