Kennyd4110's latest activity
-
Kennyd4110 reacted to City boy's post in the thread Correct Hydrasulic pressure for BX 2360? How much is too much? with
Like.
Thank you for the input. It was in fact a broken plug in the dead man circuit that just decided to separate while I had the tractor... -
Kennyd4110 replied to the thread Correct Hydrasulic pressure for BX 2360? How much is too much?.No, a bump of 150 PSI will not cause stalling, nor would a bump of 1000 PSI. This is of course assuming you set the main PRV, and...
-
Kennyd4110 reacted to Shawn T. W's post in the thread What did you do to or on your Kubota today? with Like.
While filled tires or wheel weights "might" help keep your rear tires on the ground ... They do nothing to actually balance the tractor...
-
Kennyd4110 reacted to Hugo Habicht's post in the thread What did you do to or on your Kubota today? with Like.
Filling the tractor with jerry cans took ages and was messy; never managed without spilling a bit. I had pulled a manual barrel pump...
-
If the guy was like me, he might of wanted to donate 12 bucks and poured the disgusting things in the garden later. Some of those folks...
-
Kennyd4110 replied to the thread GWT Quick Hitch.You can get extended CAT1 pins to replace the shorter ones if needed.
-
Kennyd4110 replied to the thread Bill of Sale 1969 Ford 3000.What did it sell for?
-
Kennyd4110 replied to the thread GWT Quick Hitch.You don't need any lower bushings with that hitch, but you will need (or should have) top link bushings to CAT3 size.
-
That looks like the gal who worked at a McDonald's near my work when I was living in Florida in my early 20's. Looked really cute from...
-
Kennyd4110 replied to the thread Slow hydraulic pressure bleed off.A couple 'days'? Yup, you're lucky! :ROFLMAO:
-
Kennyd4110 reacted to JonM's post in the thread What did you do to or on your Kubota today? with Like.
something dumb but handy. i put one if the harbor freight magnetic paper towel holders in my cab. orange of course. got tired...
-
Kennyd4110 reacted to North Idaho Wolfman's post in the thread Cannot get grease to get into my LA535 Loader bucket pivot joint with Like.
Pull the pins and clean the ports out.
-
No - coated carbon steel. Dan
-
Kennyd4110 replied to the thread how to repair quick connect yoke.A picture would help us know what exactly you're talking about.
-
Kennyd4110 replied to the thread Bx2380 Hydraulic Quick Connect Issues.OK... Still not clear where the fluid is coming from. The connection between the hose and fitting, or the two couplers when mated? The...