KelliherJP4031's latest activity
-
KKelliherJP4031 reacted to SDT's post in the thread Recommend a 6ft or 7ft single spindle rotary cutter (bush hog) for M7060 with
Like.
Your 7060 is more than adequate to power a 7' rough cut rotary mower in nearly all reasonable conditions. A 6' cutter will not cover... -
KUntil one day you think, "Hey I should move that little pile of dirt out of the way" and then feel sick when you see an orange thing...
-
KKelliherJP4031 reacted to McMXi's post in the thread Recommend a 6ft or 7ft single spindle rotary cutter (bush hog) for M7060 with Like.
I run a 7 ft Land Pride RC1884 and 12 ft folding cutter RC3712 behind the M6060 without any trouble at all so I don't think the weight...
-
KKelliherJP4031 reacted to SDT's post in the thread Recommend a 6ft or 7ft single spindle rotary cutter (bush hog) for M7060 with Like.
" I’d recommend a twin 8’ over a single 7’ due to how long they are and supposedly the twin 8’ requires less power to run than a single...
-
KKelliherJP4031 reacted to JasonW's post in the thread Recommend a 6ft or 7ft single spindle rotary cutter (bush hog) for M7060 with Like.
I have a 6’ and 8’ twin spindle that I use with my M6040. Handles them fine, if I end up cutting more I will go up to a 12’ batwing. I...
-
KKelliherJP4031 posted the thread Recommend a 6ft or 7ft single spindle rotary cutter (bush hog) for M7060 in Implements & Attachments.I’m in central Alabama with about 100 acres in pasture and 300 acres in wooded areas with old pulpwood roads, food plots, etc. We have a...
-
KOn recommendation of a harbor master I bought three 1.25 amp Deltran brand tenders about y2k then two 750ma about 2010. Had them on...