jyoutz's latest activity
-
At refill measure the capacity that you put in per the specs, and don't sweat it. Unless you have fluid leakage under the tractor... -
jyoutz replied to the thread Which types of grease?.I do the same. I use that for everything.
-
I use the green Lucas X-Tra Heavy Duty polyuria grease for everything. For a while a couple years ago it was impossible to find (due to...
-
jyoutz replied to the thread Tarter box blade?.Have you asked at an equipment rental company? Box blades are pretty simple chunks of steel and if they look OK they probably are.
-
Broom and blackberry I have cleared with my B2601 and mid mount mower, plus my FEL. I did not dig, I just pushed. I've also cleared...
-
Hello, I am the OP on this discussion, and as correctly stated above I have only made one post on this site and it has taken me almost a...
-
I do absolutely agree with your hypothesis/conclusion! If I could not afford, or did not enjoy eating fillet mignon...... I would never...
-
jyoutz replied to the thread Grapple options for the L2501/LA525.EA 2.0 under a new name.
-
I’m not familiar with an L4330. I’m hoping that’s the tractor we’re talking about? You didn’t specify. It looks like your Dad added...
-
jyoutz replied to the thread Is LX2620 Enought Tractor.Kubota says “cast steel”
-
I just ordered a LX2620 and I should have it in a week or so. When I started looking I pretty much settled on the B2601. After I...
-
jyoutz replied to the thread Is LX2620 Enought Tractor.Consider that the LX line has aluminum axle and transmission cases, but the L has steel.
-
jyoutz reacted to bobnic's post in the thread Reloading the loader. Couplers won't connect. with
Like.
That's why I said to use a metal rod to reach the poppet on the female coupling. This its very easy to do and does not damage the... -
“Step one, rescue vintage worn out rasp_Step two, twist one end up a bit so you can hold onto it_ (Over the horn, using tongs and a vise...
-
jyoutz replied to the thread Upgrading from the beginning.Looking at that table, I’m wondering why there is a difference in loader lift and 3ph capacity? Aren’t the 2501 and 3901 identical...