jsweeney's latest activity

  • J
    jsweeney replied to the thread No Lift.
    Mine is different from that one. I do have a dynamo but its in like an alternator not like the picks in the link. Mine has a water pump...
  • J
    jsweeney replied to the thread No Lift.
    Thanks everyone for the help. After cleaning the strainer 5 times I have lift. Only problem now is no charging. Any trouble shooting...
  • J
    jsweeney replied to the thread No Lift.
    Thank you Russel for this idea also.
  • J
    jsweeney replied to the thread No Lift.
    Thank you sir. Yes I want to make sure whats wrong. Don't want to buy when I don't need to. I'll try this.
  • J
    jsweeney replied to the thread No Lift.
    Where do I find the serial number on this B8200E. I have found the metal plate thats attached on drive side of transmission housing but...
  • J
    jsweeney replied to the thread No Lift.
    It acts like its sucking air from some where. Probably just gonna get a pump kit, o-rings and seals, and rebuild it. I found out the...
  • J
    jsweeney replied to the thread No Lift.
    I agree it looks simple and there's some little something I'm over looking but can't put a finger on it.
  • J
    jsweeney replied to the thread No Lift.
    Yes. I removed the "A" port and started the engine and a gush of fluid maybe a 1/2 cup came out then nothing. Shut engine off and...
  • J
    jsweeney replied to the thread No Lift.
    Well I've done all of the above still no lift. The pump will growl for a second or two and the lift will raise an inch when that happens...
  • J
    jsweeney replied to the thread No Lift.
    I drained fluid again and replaced o-rings #8 and hose #3. Strainer was clean this time but did spray with brake cleaner and used air to...
  • J
    jsweeney replied to the thread No Lift.
    I ran it to warm up fluid. Drained fluid and noticed the fluid is full of air bubbles. Is this normal and if not where might it be...
  • J
    jsweeney replied to the thread No Lift.
    Would pouring kerosene through fill port and letting it run out the strainer port be ok? Since strainer is at bottom of reservoir it...
  • J
    jsweeney replied to the thread No Lift.
    Maybe just age and lack of use? The fluid wasn't clear like new fluid ,not dark like dirty, but wasn't milky like contaminated with...
  • J
    jsweeney replied to the thread No Lift.
    This is a 1986 year model with only 427 hrs. I'm told everything is original.
  • J
    jsweeney replied to the thread No Lift.
    Ok so I drained fluid and removed strainer and it was clogged with gunk. I cleaned and reinstalled and filed with new fluid. Started...
Show older items
Top Bottom