Joekelsch's latest activity
-
JJoekelsch replied to the thread Bradco 715 front blade attachment.Thank you!
-
JJoekelsch replied to the thread Bradco 715 front blade attachment.Everything works now. The only time anything comes out of the OUT is when I'm running the levers.
-
JJoekelsch replied to the thread Bradco 715 front blade attachment.Yes. And it was high pressure.
-
JJoekelsch replied to the thread Bradco 715 front blade attachment.I pulled the loose hose and attached the remote. That definitely does not work. The only way the attachment worked was when the B port...
-
JJoekelsch replied to the thread Bradco 715 front blade attachment.I wasn't sure what you meant. I disconnected the remote line and attached the line from the B port from the tractor. Where I had that...
-
JJoekelsch replied to the thread Bradco 715 front blade attachment.Both of these ports have large adapters unlike every other adapter.
-
JJoekelsch replied to the thread Bradco 715 front blade attachment.The hose I'm talking about is on the left going straight down. The OUT on the attachment is on the right with the new hose and the pipe...
-
-
JJoekelsch replied to the thread Bradco 715 front blade attachment.There is a remote plumbed out of the bottom of the valve. It's the smaller diameter hose. The other remote is plumbed into the branch of...
-
JJoekelsch replied to the thread Bradco 715 front blade attachment.I looped A and B and the 3 point and power steering work fine. It started great without struggling. Could there be something gummed up...
-
JJoekelsch replied to the thread Bradco 715 front blade attachment.The directional valve is in all the way (clockwise) finger tight. The 3 point goes up eventually. The power steering is pretty much...
-
JJoekelsch replied to the thread Bradco 715 front blade attachment.After turning the valve as far as the instructions say, I got a strong flow with no noise out of the OUT port on the attachment. I put...
-
JJoekelsch replied to the thread Bradco 715 front blade attachment.Do you mean port A on the tractor?
-
JJoekelsch replied to the thread Bradco 715 front blade attachment.I swapped the lines on the tractor and followed the instructions on the label and it mostly works. I couldn't get the directional valve...
-
JJoekelsch replied to the thread Bradco 715 front blade attachment.I took the hoses off and put the original pligs in to check the 3 point with the valve turned clockwise and counterclockwise. I put the...
-
JJoekelsch replied to the thread Bradco 715 front blade attachment.I moved the levers for the control valve. The only one that did anything was swing left, but only a little bit.
