jimh406's latest activity
-
Jjimh406 reacted to connortn's post in the thread L2501 extra wired plug type under left fender with
Like.
Update....' I received the kubota plug from Speed25 and finally finished installing it between rains. Worked perfect! Thanks Speed25... -
Jjimh406 reacted to McMXi's post in the thread In search of a better truck for towing the M6060 and folding cutter. with Like.
I'm a little under half way through a 3,400 mile road trip with the F-450, and the three-day drive out here got me thinking about the...
-
Jjimh406 replied to the thread In search of a better truck for towing the M6060 and folding cutter..You obviously can which is why other engines are made. I'm assuming your F650 has the 7.3. The older models have almost zero power in...
-
Jjimh406 replied to the thread Dipping toes in the world of Welding.Try your neighbors welders if they will let you. Like Kubotas, some welding machines are better than others. Maybe make a list of...
-
Jjimh406 replied to the thread Leveling a Land Pride Quick Hitch / Proper Angle for Brush Hog.1. The lower adjustment arm is only adjustable on one side. 2.
-
JThanks all. It’s a Woodford model K1C. They look to be one of the more common hydrants. I’ll look for parts and replace the whole...
-
Jjimh406 replied to the thread Hydrant Head Replacement?.I can't make out the brand, but some brands have all of the replacement parts. Some are made to replace parts without digging them up.
-
Jjimh406 reacted to MapleLeafFarmer's post in the thread Good running to bad in an instant with Like.
My initial guess is crappy fuel. Would be my first and easy to check and clean. Alge grows in the fuel between the layer of water /...
-
Jjimh406 replied to the thread Securing factory warranty when buying from private seller.I don't get the point in asking the owner questions. They can say whatever. I do think it's worth having a checklist to verify that...
-
JI've had my MS wireless for quite a while. Once in a while it screws up and usually it boils down to a weak battery of dirty light. I...
-
JBattery or fuzz that needs blown out?
-
Jjimh406 reacted to Jazamei's post in the thread Thank you everyone!… From a new tractor owner. (B2601) with Like.
So, after reading through a myriad of comments from the members out here, and learning from their experience and wisdom, I decided to...
-
JThe 3% goes straight to the CC companies. Someone has to pay for those "rewards"
-
Jjimh406 replied to the thread 3% in New Hampshire.Businesses have been charging extra for CC for a long time. The first place I saw it was at a gun store. Frankly, I feel like it's a...
-
JThe 3% is due to the charge to the vendor for credit card transactions. Has no bearing on the state's Sales Tax or other state fees...