JasonW's latest activity
-
JJasonW replied to the thread ZD1511 not achieving full deck RPMs.Does it have a tachometer? That model has an ECU correct? Have you talked with your tuner?
-
JJasonW replied to the thread Stabilizer on my L4802.This pins do not have to be in the same spot on each side. As long as your implement is centered you are good to go. If they are hard...
-
JJasonW replied to the thread New L3902 - 17h - Lost all hydraulics.What does “level seems ok” mean? Is the level in the correct range on the dipstick? How are you determining pressure?
-
JJasonW replied to the thread Replacement parts.Either Messicks or Coleman’s online for parts. But it wouldn’t hurt to get prices from your local dealer. Especially larger items like...
-
JJasonW replied to the thread Dipping toes in the world of Welding.Read up on the different processes and then decide which would be best for you. 110v units or 220v units. They have multi process...
-
JJasonW replied to the thread Recommended brush hog for L3010?.For the prices you have listed and the amount of use it would get I would recommend looking for a used 5’ bush hog with a shear pin. Way...
-
JJasonW replied to the thread Up a creek.Id like to point out the clutch adjustment is considered maintenance.
-
JJasonW replied to the thread Up a creek.How many hours are in it? How many hours did the first clutch last?
-
JJasonW replied to the thread Up a creek.Clutch pedal adjusted correctly? Will it move in 2nd high range?
-
JJasonW replied to the thread Slip clutch.What implements do you have with it? Slip clutch goes on the implement. I would just run what they came with unless you have extra money...
-
JJasonW replied to the thread Kubota M9000 hydraulic fluid contamination..Is it barn kept or left in the open? Could be rain water getting into a broken vent tube.
-
JJasonW replied to the thread MX5100 clutch issue..For reference how many hours are on the tractor?
-
JJasonW replied to the thread What is Messick's Smoking.Unless I missed something your first post had (2) 5 gallons of UDT2 from Messicks. And the only from Coleman’s shows (3) 1 gallon...
-
JJasonW replied to the thread Dually valve stem extensions.Correct. I was referring to the ones posted above that has check valves.
-
JJasonW replied to the thread MX5100 clutch issue..What gear were you in and how fast? Could have over spun the clutch. Also interested in your reasoning for operating like that.