imnukensc's latest activity
-
IMaybe take the wheel out of the (previously) vertical tube, install a rod or pipe in the tube and pull it straight. You might be able...
-
Iimnukensc replied to the thread Bent mower deck.I used big a big pipe wrench on mine. May need a couple for that one.
-
IYou're all missing the point: the OP told you all to do something a certain way and yinz are going to do it. Without fail.
-
ISafety chains are like air bags and roll bars: last resort that should be present but preferably never actually used. Here, two are...
-
IBuy a bunch of small fish and toss ‘em into that pond and FEED THE PET HERON! (I like blue herons a Lot more than fish and frogs. LOL)
-
IGot everything ready FINALLY! Everyone's all plated up!
-
II felt really bad about how for many years I’d bought what was cheap and well-marketed as “dog food” ….and forced my dogs to eat...
-
Iimnukensc reacted to Daren Todd's post in the thread Photo shoot anything lately? Random Photo Thread with
Like.
Just before sunrise this morning. -
Iimnukensc reacted to NCL4701's post in the thread Photo shoot anything lately? Random Photo Thread with Like.
This cardinal flower is the only one I’ve ever seen on our place. For at least the last 15 years, it shows up every fall in the same...
-
Iimnukensc replied to the thread Repairing sanding belts.I've got about 150, 1X42 belts I bought several years ago down in the non climate controlled shop. Yeah, they last about 30 seconds...
-
II have two 2 x 72 inch belt grinders and have purchased lots of belts. My understanding is that the tape used is both pressure and heat...
-
Iimnukensc reacted to Jason Sewell's post in the thread Building My Own Replacement Instrument Cluster for the BX Series with Like.
This thread may only be of interest to people who 1) Own a BX-series, 2) Have suffered repeated instrument cluster failure due to water...
-
IColor cannot be relied upon to determine what is “correct”…. as there is no actual industry standard followed. The best resource is...
-
Iimnukensc replied to the thread Get rid of yellow jacket nest above ground?.Something like this is what I think the OP is talking about. Not sure why his would have a hole in it. Mine doesn't and have never seen...
-
II ran an RM59 with my B7100, and it handled it great. I cut a lot of grass with that combo. The B7100 is 14 PTO hp, and I never ran out...