imarobot's latest activity
-
II’d like to give a shoutout for Chappell Tractor in Milford NH and their tech Andy. I called Chappell as you recommended. Spoke to...
-
II would seriously consider looking for another dealer... one that tells the truth! R4's are THE worst tires for snow...
-
IR4's are probably the worst choice for snow.
-
Iimarobot replied to the thread Daily Chuckle.This guy loved sports, and tried them all, but the only thing he was kinda good at was wrestling. His coach worked with him and he...
-
Iimarobot replied to the thread L2195A Gear Oil change.I wish everything was like that!
-
Iimarobot replied to the thread L2195A Gear Oil change.Ever??? This thing is 12 years old
-
Iimarobot replied to the thread Wheels for land rake...yes or no?.Good point, my driveway is pretty much level
-
Iimarobot replied to the thread L2195A Gear Oil change.Manual says to check every 24 hours and add as needed. No mention of when or how to change it.
-
Iimarobot replied to the thread L2195A Gear Oil change.I know this an old post but I'm hoping someone can answer a question for me. So it appears there is no drain plug for the gear case so I...
-
Iimarobot replied to the thread Wheels for land rake...yes or no?.I don't have a land rake but did have a gravel rake I used on my dirt driveway. It had wheels on it, but I didn't use them. I found it...
-
Iimarobot reacted to Keith7483's post in the thread M5400 won't start, have changed most everything with
Like.
HI ALL, THANG VERY MUCH FOR THE HELP. TURNED OUT TO BE 2 PROBLEMS AT THE SAME TIME, BAD KEY MECHANISM, AND A CORRODED HOT WIRE TO... -
Iimarobot replied to the thread Blue Diamond Flail Mower.Could be. I've also heard that they were one call Titan but they changed the name to not be confused with another Titan equipment brand...
-
II believe Cosmo makes the IronCraft Flail. If not... they sure made them look exactly alike. Greg
-
Iimarobot replied to the thread Blue Diamond Flail Mower.Found an owner's manual for the Centurian just to look thru to get more info on it. I noticed the instructions for adjusting the belt...
-
Iimarobot replied to the thread Kubota Standard Bolt Grades.Tighten until it starts to break, then back off a half a turn