imarobot's latest activity
-
IFYI, for vents such as these, I simply stick a fuel filter of the appropriate hose size on the end. That allows the vent to vent and...
-
Iimarobot replied to the thread What is this bleeder for?.Yep, remove it when greasing until grease comes out. If you have the owner's manual it's explained there.
-
Iimarobot replied to the thread Kubota stopped venting front axle?.The axle on my tractor is not vented and will build up pressure. I did have a leak, but that was at 800 hrs, so I'm not going to blame...
-
Iimarobot replied to the thread L5740 Stall Guard.All of the mode lights use the same bulb. No colored lights, the magic is done by the filter on the display.
-
Iimarobot replied to the thread L5740 Stall Guard.I still have 9 :)
-
Iimarobot replied to the thread Front axle leaking on tractor?.I recently replaced the seal on mine, not too hard to do. In addition to that seal I also replaced the bevel gear case seal, bevel gear...
-
Iimarobot replied to the thread L5740 Stall Guard.Just wanted to follow up for anyone that has a blown bulb in their display module. I did not find a direct replacement bulb going by the...
-
I^^^^^^ Even in warm climates (where I live), if there is high humidity, the same thing will occur. Generally, I'll use my tractor long...
-
Iimarobot replied to the thread Engine oil interval.Manual doesn't state this, but the maintenance schedule for a lot of other engines state to change oil by hours or every year or two...
-
II spend enough time keeping it off the house and sheds. Tires are on their own:)
