Henro's latest activity
-
Henro replied to the thread "Burnishing" your new brakes. WTF......... Now I've heard it all. (I'm raising the Bullsh!t flag).I should not divulge this inside information. It really is a top secret development. What appears to be a propulsion device is actually... -
Henro replied to the thread "Burnishing" your new brakes. WTF......... Now I've heard it all. (I'm raising the Bullsh!t flag).Sounds like a lot of Marlarkey! :giggle:
-
-
Henro replied to the thread FEL slowly goes down..Thanks Dan, I now understand the load check valve is in the pressure circuit within the valve, after the P port and before the spool...
-
Henro replied to the thread FEL slowly goes down..Nice explanation. Thank you So is there one load check valve for each direction of movement? Frydaddy96’s experience is that his issue...
-
Henro replied to the thread FEL slowly goes down..Thanks Dan, One more thing to read up on now.:)
-
Henro replied to the thread FEL slowly goes down..First time I head of a load check valve in a loader control valve for a BX Kubota...Or any small Kubota tractor really. Tell us more...
-
I had to go back and see what the original thread was about. This one may have set a record for staggering like a drunk 🕺
-
Henro replied to the thread B7800 Purchase.Carpenter tape measure accuracy: 32 & 9/16" between uprights. Add 2 inches for center to center. Uprights are 2x3 inch tubing, thus CC...
-
Henro replied to the thread Daily Chuckle.
-
-
Henro replied to the thread B7800 Purchase.If swapping is not an option, you could have a weld shop shorten the top half of the B7800 ROPS. or do it yourself if you’re a competent...
-
Henro replied to the thread Does anyone know what a BX23S rear wheel and tire weigh?.My guess would be that you got the proper amount of fluid in the tires. I’m basing this guess on the recollection that my rear tires on...
-
Henro replied to the thread Bat house/kestrel nesting box pole construction critique and suggestions wanted..I was curious what Ken's Oak Savanna Project was... Here is a very nice video he made describing it. First post in the thread (thanks...
-
Henro replied to the thread OK one more bytch!.Damn you Skeets...now I am going to have to reconsider how I think of myself... :ROFLMAO: (Skeets, Hagrid and I met for lunch once a...
