GreensvilleJay's latest activity
-
GGreensvilleJay replied to the thread 2011 Kubota RTV 500 starts and runs 5 seconds then dies.querry. did he get billed for replacing the original good parts with new parts that did NOT fox the problem ?
-
GGreensvilleJay replied to the thread Hydraulic pump with through shaft.curious as to what you want to power with the 'pump' ? A possible location would be the 'fan belt system'. Several guys added a car...
-
GGreensvilleJay replied to the thread B2320 headlight female adapter.tad cheaper than up here... https://www.thewrenchmonkey.ca/products/auto-parts/standard-motor-products/s2334/
-
GGreensvilleJay replied to the thread BX1880 brush hog performance.hmm BX1880, so maybe 13HP out the PTO ?? Seems weak to spin a 48" blade round and round ,especially if grass is more than 6" tall ??
-
GGreensvilleJay replied to the thread Smooth Trails.Buy an old set(2) of pull discs, add 4 solid concrete blocks to the rear section, tow a heavy bar and chains behind. set discs to medium...
-
GGreensvilleJay replied to the thread Entrance step.yeesh $500 for 4 pieces of steel is kinda expensive ! About $350 US$ ? Still too pricey. Visit a local 'metal fab shop', probably $100...
-
GGreensvilleJay replied to the thread What size wrench. Large locknut on adjuster bar for boxblade.FYI an M30 bolt could have 'across flats' larger or smaller than 46mm in that chart. there's no law that says it MUST be 46mm. have...
-
GGreensvilleJay replied to the thread Cannot get grease to get into my LA535 Loader bucket pivot joint.yes, pull the pins... one at a time and use a section of broom handle as a 'substitute' pin.
-
GGreensvilleJay replied to the thread B2650 5amp OPC/Panel keeps blowing.man, just wait until 'they' mandate 'driver's seat occupied' switches in cars and you eat 1/2 can of beans for lunch....
-
GGreensvilleJay replied to the thread how to repair quick connect yoke.yes, I'm confused, though being 'north of 70' might explain some of that....
-
GGreensvilleJay replied to the thread 2021 Kubota BX1880 (Need Help Fast on Pricing).At that price, I'd buy it JUST for the tractor/tiller combo.Being 'north' of 70, I don't use the 3 walkbehind tillers in the tractor...
-
GGreensvilleJay replied to the thread T1400.since it's almost 30 years old, I suspect the linkages between pedal and HST are worn and need adjustment. www.kubotabooks.com may have...
-
GGreensvilleJay replied to the thread Damaged Wheel Flange BX2380.I did what fedup said with my forklift 5-6 years ago, never had a problem since.
-
GGreensvilleJay replied to the thread BX 23S PTO damage.hmm... what was the PTO powering ? I've never run the PTO on my BX23S in 7+ years, would have to look at what's inside to see how the...
-
GGreensvilleJay replied to the thread Maintenance Schedule “Replace” Items — Stupid..? ?.hmm, wonder how often anyone here changes the differential oil in their pickup trucks ?