GreensvilleJay's latest activity
-
GGreensvilleJay replied to the thread Firewood Moisture Meter.yeesh, what's wrong with cut ,stack, burn 2 years later method ? re: 'kiln dried firewood' HAS to be expensive to buy
-
GGreensvilleJay replied to the thread Pulling logs.'best way' ? Put sign up 'free firewood logs'. they'll all be gone in a day and YOU won't have to haul them and burn them.
-
GGreensvilleJay replied to the thread Removing Old Grips from ZD326 Control Levers?.wear a welding glove, then use heatgun to get the grip 'soft'(you'll know), then pull them off I use the heatgun to get the plastic...
-
GGreensvilleJay replied to the thread Daily Chuckle.PURRfect....!!!!! I gotta rememeber that one
-
GGreensvilleJay replied to the thread Daily Chuckle.have to ask. WHY in the plastic case ?
-
GGreensvilleJay replied to the thread ZD326 Died; Dump Fuel?.so recap.... it runs fine on the LEFT tank and lousy on the RIGHT tank ????? I looked at parts finder, so if true, then you have...
-
GGreensvilleJay replied to the thread ZD326 Died; Dump Fuel?.I'd drain BOTH tanks, properly clean and inspect them. yes, probably a PITA but if there's ANY 'stuff' inside,better to get it out NOW...
-
GGreensvilleJay replied to the thread needing a hand with the wiring of an aftermarket combination switch.curious, I 'right clicked copied',saved to desktop, used IRFAN to open it , could see it OK,fine even at 217%.
-
GGreensvilleJay replied to the thread needing a hand with the wiring of an aftermarket combination switch.years ago someone posted a link to the manufacturer of those switches. There are several versions BUT they also listed the...
-
GGreensvilleJay replied to the thread Getting more lifting power for a LA211 loader.check the capacity of your front tires !!!!
-
GGreensvilleJay replied to the thread Three point, Lift Capacity.to add more 'fuel to the fire'..... the 3PH doesn't rise straight up, goes in an 'arc', which changes depending on where the lift arms...
-
GGreensvilleJay replied to the thread three point arm failure on MX6000 with 149hrs..yeesh, I zoomed up the damaged area and it looks, with my bad eyes, that the 'shaft' #070 might be damaged as well ?? Hopefully...
-
GGreensvilleJay replied to the thread Daily Chuckle.at least the wood chips are GREEN !
-
GGreensvilleJay replied to the thread Three point, Lift Capacity.Bet it isn't 'linear' but some gawdawful 'math' that involves all those things like SINEs,COSes, TANs and other 'weird' math we never...
-
GGreensvilleJay replied to the thread Plastic, stackable pallets?.but, but skids are FREE !!!