GreensvilleJay's latest activity
-
GGreensvilleJay replied to the thread Rim Guard ballast and rubber valve stems?.Like my cat, I'm curious ,, as to why you added ballast as Kubota specifically says to NOT do so ,when the backhoe is on the tractor...
-
GGreensvilleJay replied to the thread Max safe depth for water crossing?.hmm, does front axle have a 'breather' port on it ? HST et al will be fine, they are a sealed unit(might be a breather ?? but up high )...
-
GGreensvilleJay replied to the thread M5-111 DTC engine U02A3 error ACU.'comm buss open error' sounds like 'plug on cable has detached or mouse has shewed though a wire' to not allow the Auxillary Control...
-
GGreensvilleJay replied to the thread New to orange.My 2018 BX23S came with fan guard, only $30 for it,probably fits many 'BX' series ? My version of ballast box is to use a 'carryall'...
-
GGreensvilleJay replied to the thread BX lift pump issues..curious.... the lift pump is $238.00 in Canada..... ..
-
GGreensvilleJay replied to the thread Debating purchase of a used BX2830 snowblower.there's been a lot of posts about the front 'quick hitch' / snowblower setup with the 'dog clutch' parts wearing out/failing very,very...
-
GGreensvilleJay replied to the thread Bro-Tek Skidplates for BX23S and maintenance....My 2018 BX23S came with a steel 'fan guard', about $25, 4 nuts and bolts holds it on.
-
GGreensvilleJay replied to the thread BX2380 might be broke..wow you all dodged a very expensive mistake!!! Best use a BFH and drive that pipe below grade!
-
GGreensvilleJay replied to the thread BX lift pump issues..no, it just didn't have any power.....
-
GGreensvilleJay replied to the thread BX lift pump issues..Heck my BX23S ran for weeks without a lift pump.... only noticed the connector off of it when I crawled under to see 'something'. Saw...
-
GGreensvilleJay replied to the thread 3 point pallet forks.nuther option, TSC 'countyline' carryall at $230 +-, carries 1000# I made my own ,using 42" forklift forks. I've hauled 3000# logs with...
-
GGreensvilleJay replied to the thread Bro-Tek Skidplates for BX23S and maintenance....quik look at Brotek......according to the website, you'll have to remove the mid plate for service(HST filter, 1st fuel filter) AMD...
-
GGreensvilleJay replied to the thread Dang flat face quick connects..possible option ?? maybe get an SSQA 'pallet fork' ? kinda sounds like you don't use the grapple too often as it's a PITA but forks are...
-
GGreensvilleJay replied to the thread query about tiller FL1271R.The ad says 48" tiller, Messicks says 52" Here's the ad...
-
-
GGreensvilleJay replied to the thread Beet juice and chains....re: 1 I say NO to beet juice. If you have BH on, NO beet juice ,according to Kubota. Doubt you'd need juice with BB. Stick in 4WD, low...
