GreensvilleJay's latest activity
-
GNo money in cures.
-
GGreensvilleJay replied to the thread L3901 Tractor runs 5 minutes then stalls.try removing or unscrewing fuel cap and see if it runs fine ?? 'junk' in tank ??
-
GGreensvilleJay replied to the thread Schematics G1900 wanted, question regarding fuses.Gonna be interesting to hear why they're in parallel !
-
GGreensvilleJay replied to the thread BX2380 Workshop Manual.www.kubotabooks.com
-
GGreensvilleJay replied to the thread Firewood bucket recommendations anyone?.Instead of cutting 16", cut them to 12". You'll be surprised how 'light' them rounds now are.,especially when lifting up to the splitter.
-
GGreensvilleJay replied to the thread Bent Wheel Yoke on RCR1860.remove from cutter, remove wheel, put 'yoke' part in vice with 'spacer'(fills gap where wheel was),so it's FIRMLY held. select...
-
GGreensvilleJay replied to the thread B2400 Lift Pump Replaced with Electric Pump.gee, so far 1489 hrs on my 7 year old BX23S with original lift pump. had 'debris' in tank once, removed tank, properly cleaned it, over...
-
GGreensvilleJay replied to the thread B1550 battery drain.vermin, aka MICE, chewed through some wires..... if it has an alternator, internal diode damage if it has a rect/reg, internal damage
-
GGreensvilleJay replied to the thread Homemade Channel Iron Forks.NICE !!!! FORKS are sooooooo handy for 100s of jobs !
-
GGreensvilleJay replied to the thread Hydraulic Pump.It's better to have on YOUR shelf and not need it, than having to pay $$$$$$ when you do !
-
GGreensvilleJay replied to the thread Daily Chuckle.what was in Evil's back...... like no wonder the guy was on 'meds' 24/7 !!
-
-
GGreensvilleJay replied to the thread Kubota bx2230 front wheel drive shaft broken. How to remove.I'm thinking remove #140 snap ring, part 120 comes off, 4 balls hit the ground and the shaft slides off ?? I know guys here say grease...
-
GGreensvilleJay replied to the thread Kubota bx2230 front wheel drive shaft broken. How to remove.I'm pretty sure #090 is what is busted , the 'propellor shaft'looks like bracket #240 has to come off, then.... others will know for...
-
-
GGreensvilleJay replied to the thread Front axle leaking on tractor?.Did both on my BX23S over the years, not that hard, maybe 2 hours providing phone doesn't ring, neighbours don't show up.....having a...
-
GGreensvilleJay replied to the thread Loader arm retention clip broken, how screwed am I?.it's part number 7J62656063 , about $22 here in Canada,my local dealer probably has them on the shelf. I'll look tomorrow to see...'how...
