GreensvilleJay's latest activity
-
GGreensvilleJay replied to the thread Bad Welds?.re: He claims that piercing the I-beam weakens the design. Is he right? I'd say no. Look at TJI floor joists and see how many...
-
GGreensvilleJay replied to the thread Old T1400 HST fuel leak.curious, found this , appears to have an electric 'anti dieseling' valve'. When they get 'gummed up', they don't totally shut off gas...
-
-
GGreensvilleJay replied to the thread Dump trailer questions.My ancient dumper got an electrical upgrade....about 15 years ago cable from truck goes to one of those 7 studded trailer connector...
-
GGreensvilleJay replied to the thread Are you lacking in creative energy?.truly impressive !
-
GGreensvilleJay replied to the thread Bad Welds?.Mine was bought in 2018.... dang almost 7 years ago.
-
GGreensvilleJay replied to the thread Dump trailer questions.my advice... install backup lights ! wiring, if 7 pin, is already there in the box on the tongue.
-
GGreensvilleJay replied to the thread Bad Welds?.Well at the 'end of the day', I KNOW it took me 1/2 a day to remove all the 'other stuff', 7 minutes to transport to shop,he spent maybe...
-
GGreensvilleJay replied to the thread Bad Welds?.They built them right, for the designed load that they were made for, roughly 700#. If properly prepped and welded, it works just fine...
-
GGreensvilleJay replied to the thread Bad Welds?.I KNOW a proper butt weld has survived my 'testing' since it was done. Actually was told to not be 'gentle', and I have a lifetime...
-
GGreensvilleJay replied to the thread Post Hole attachment for BX25D.clearing is one thing.... hmm... how DEEP must you dig !!! Around me 3 1/2 feet is 'frost', which of course varies nbased on where you...
-
GGreensvilleJay replied to the thread Bad Welds?.It looks the same as mine did, NO 'penetration'. Tube is 'butt welded' not pierced. While mine was 'out of warranty', KubCda did inject...
-
GGreensvilleJay replied to the thread Bad Welds?.BTDT, 2018 BX23S, 3 years ago ?.... heck I thought someone had 'borrowed' MY pictures ! Kubota Canada wanted $2500+ 13% for just the 3...
-
GGreensvilleJay replied to the thread Kubota stopped venting front axle?.curious... the vents they are,were ? using, do they have internal one way valves to vent air out, but prevent water getting in ?
-
GGreensvilleJay replied to the thread wanting to put cab and ac on a b2601.I had tinted (factory privacy) door windows on my F150 for 27 years. Finally replaced them last summer with clear glass as it was a...
-
GGreensvilleJay replied to the thread Grease fitting.If for the BX3S, stab arms, as in the drawing... Kubota # 7559981521 1/4-25 * .68" long grease fitting...
-
