Grandad4's latest activity
-
Grandad4 replied to the thread Box blade tilt angle..As you are discovering, a box blade can do a variety of things but there is some subtleness in adjusting it to get the most out of it... -
Grandad4 replied to the thread What models of mid mower decks for B2710?.Thanks for the correction, Mountainman!
-
Grandad4 replied to the thread What models of mid mower decks for B2710?.RCK60-27B RCK72-27B Source: Tractordata.com
-
Yesterday, I stopped by my local TSC store to grab a big bag of dog food for my loyal livestock guardian. As I was waiting in line at...
-
Some more than others. ;)
-
Grandad4 replied to the thread FEL while mowing..Actually it's the other way since the BX came after the B. The BX is a low rider B.
-
I like to leave to loader alone and not mow. ;)
-
^All these, plus one more reason for me - visibility. The 50 acres I mow every year is very rough, with some big holes PLUS big mounds...
-
Grandad4 replied to the thread FEL while mowing..Loader and anything on the 3 pt always came off for mowing. Reasons: 1. Better ride and handling while mowing. 2. Less likely to take...
-
Grandad4 replied to the thread 3 pt movement speed..B 2 O: Did your previous NH maybe have "position control"? That give full, accurate hydraulic control of 3 point up/down movement and...
-
Grandad4 reacted to chim's post in the thread Front ballast for L4760 when using Woods TKP84.40 mower with
Like.
My next door BIL and I out mowing. -
I don't have a PTO driven mower, but I have found some long-lost wire, rope, and old garden hose over the years with my belly mower. Do...
-
Grandad4 replied to the thread Newbie in Western Carolina.Happy: Welcome here. You have a lot of good, honest advice here, maybe not all saying the same thing because everyone's situation is...
-
Grandad4 replied to the thread BX2200 belly mower.I had a BX2230, largely the same as the BX220. We changed over from belly mower to 3 point operation often as I never liked either...
-
You can very easily change an HST to be hand controlled, we have had several members that have done it over the years.