GeoHorn's latest activity
-
GeoHorn replied to the thread King Kutter finish mower bearings.WHY would you start searching all-over-the-world for a small part….. instead of simply contacting the implement manufacturer or dealer? -
I don’t know where you are in Austin, but this is a great place to have a starter or alternator repaired. Roughly at 35 and Rundberg...
-
GeoHorn replied to the thread BX Rear light guards.I’m all for this fellow up in Canada…. he makes fine stuff. Mostly. I wouldn’t buy his steering wheel spinner tho’…when comparing it...
-
GeoHorn replied to the thread i need help with these errors on my L 3560 tractor.That crankshaft position sensor is the most serious and will prevent any start….… But the common theme here strikes me as a poor...
-
GeoHorn replied to the thread M5040 3 point hitch.PUsh lever FWD / DN the lift arms go Down…and pull lever AFT / UP and the lift arms go UP…. right?
-
GeoHorn replied to the thread Diesel mushrooms.Biologicals live in the interface between the water and the fuel. The Fuel is used for food and their body-wastes are what create the...
-
You're probably right about the bolt together being easier for shipping, but with the number, size and class of bolts I've used I don't...
-
GeoHorn replied to the thread Diesel mushrooms.Biobor JF is a Twenty-Mule-Team product which was mfr’r and FAA approved to use in my employer’s jet aircraft fuel tanks. I use it in...
-
Seems like the biological treatments are a much easier solution.
-
GeoHorn replied to the thread Exhaust modification.That’s very pretty work! A “bolt-together” would be better from a commercial production standpoint…so it can be shipped …and can be...
-
GeoHorn replied to the thread Exhaust modification.I would suggest you install a cross-over between the tops of the towers to prevent them from spreading when you use the FEL to shove...
-
The original muffler had to go as it was in the way of the support frame for the front loader I'm making. I made a new square flange and...
-
GeoHorn replied to the thread B7800 front axle ball bearing question.You know it’s a bad day when the Wolfman posts things like “Kubota bearings are never press fitted….. (except when they are)….” and...
-
GeoHorn replied to the thread Electric fan for B7100HST.Another reason for modern “high output” alternators is all the added electrical demands of auto-opening/closing tailgates, sliding...
-
-
GeoHorn replied to the thread Tractor step.Northern Tool sells them...
