GeoHorn's latest activity
-
GeoHorn replied to the thread Exhaust modification.That’s very pretty work! A “bolt-together” would be better from a commercial production standpoint…so it can be shipped …and can be... -
GeoHorn replied to the thread Exhaust modification.I would suggest you install a cross-over between the tops of the towers to prevent them from spreading when you use the FEL to shove...
-
The original muffler had to go as it was in the way of the support frame for the front loader I'm making. I made a new square flange and...
-
GeoHorn replied to the thread B7800 front axle ball bearing question.You know it’s a bad day when the Wolfman posts things like “Kubota bearings are never press fitted….. (except when they are)….” and...
-
GeoHorn replied to the thread Electric fan for B7100HST.Another reason for modern “high output” alternators is all the added electrical demands of auto-opening/closing tailgates, sliding...
-
-
GeoHorn replied to the thread Tractor step.Northern Tool sells them...
-
GeoHorn replied to the thread Electric fan for B7100HST.Yep…my JD 4239 had reverted to a “thermo-siphon” ….(and also failed to properly cool.) 🤣
-
GeoHorn replied to the thread B7800 front axle ball bearing question.Neil…. How do you know your 20-ish year old machine hasn’t had someone in there before You that substituted non-OEM bearings on one...
-
GeoHorn replied to the thread Fixing ZD326 Jack and Removing Left Fuel Tank.
-
-
GeoHorn replied to the thread MX5200HST Fuel Leak/Tank Reserve Failure.Not YOUR tractor…but a common type of failure…on a common type of fuel-filter-valve on these tractors…. The metal top of the filter...
-
-
GeoHorn replied to the thread Electric fan for B7100HST.This reminds me of a problem I had with a JD 4329 engine I own. A couple years ago it would overheat intermittently at first, but then...
-
GeoHorn replied to the thread Kubota M5950DT No Start.A tractor that age might have a fuel shut-down valve operated by a manual pull-knob and cable system…. Have you checked that connection...
-
GeoHorn replied to the thread Fuel gauge and temperature gauges pegging to full fuel and hot after 45 - 60 minutes..Mechanical gauges “usually” operate similarly…. a bi-metallic strip is wrapped in resistance-wire that heats up and causes the strip to...
-
GeoHorn replied to the thread Tractor step.Shouldn’ t be too difficult to weld or bolt a reinforcement to the step.
-
GeoHorn replied to the thread Box or Grading Scraper?.A land-plane / grading-scraper…is easy to use if all you want to do is smooth-over existing gravel. But if you need to actually Move...
