Flintknapper's latest activity
-
Done it a few times. Takes practice to master getting stuck. You'll get there, just keep at it. If you need hints, ask. -
If the clutch housing is under water (looks like it might not be) pull the drain on the clutch housing. If any water comes out get a big...
-
Thought I could get across this little muddy spot without the mower dragging in the mud and acting like a 600 lb. anchor. I was wrong...
-
-
Flintknapper replied to the thread New owner of an old tractor.Another consideration (not yet mentioned) concerning choice of a PTO drive shaft is configuration. The 'length' has been discussed here...
-
I have that kind of conversation with my better half. I use my line of "it doesn't work like that" in explaining something she doesn't...
-
-
Flintknapper replied to the thread Bad Welds?.My thought as well. The weld itself is intact. (welding metal being many times stonger than the base metal). Inferior base metal pulled...
-
Flintknapper replied to the thread Rock Rakes???.If you plan to use a Landscape Rake primarily to collect/move rocks, you might consider one that has reinforced tines.
-
-
Flintknapper replied to the thread Land Pride disc question.Common problem with 'some' Cat 1 implements. Just 'flip' the pins inward as already suggested above.
-
-
Flintknapper reacted to PHPaul's post in the thread I forgot The First Rule of Aftermarket Accessories with
Like.
"Nothing is ever as easy as the instructions say it is." However, I endeavoured to persevere and got the front mud guards mounted... -
Thank you all, most appreciated to getsome advice. The only change I made, are the bearings and I did need to put a 1.92 thou shim...
-
Flintknapper replied to the thread Differential Contact Pattern.I would tend to agree with the above. It is essential to establish proper backlash and preload FIRST. That way you know you have...
-
-
Don't like dealers? How about Amazon...
-
Flintknapper replied to the thread No end to BS.My 'guess' would be that someone without the authority to shoot that through (against policy), did just that...and once discovered, it...
-
Flintknapper replied to the thread No end to BS.^^^^^ Has always been my experience as well. 5-7 days typically, regardless anything said to the contrary. So....best to figure on...
