Recent content by fisherfishing64

If it was the rockshaft would i see other symptoms? When I lift the 3point by hand with the control lever pulled to the upper position the 3 point does not drift back down its stays in place even with a load applied. Would this still happen if the seal was leaking by?

I tore the relief valve near the seat apart cleaned it didn't see any broken o rings, dirt or damage, this was my thought as well but there were no signs of damage to the naked eye I may replace it regardless just to rule it out but nothing seemed out of order.

I have a set of hoses that run out to the rear of the tractor to run 3 point implements such as a log splitter or other implements requiring hydraulics. I hooked up my log splitter and ran a few large logs through it to confirm the pump was indeed making proper pressure. I have concluded my pump...

I have a L2850 DT that will not lift a load on the three point. It went from working fine one day to not at all the next to working intermittently once. I have pressure for my PS, have pressure for auxiliary items i.e. log splitter, my 3 point will lift with no load on it slower than usual. It...

I am also having the same problem with the same tractor. I have pressure for my PS, have pressure for auxiliary items i.e. log splitter, my 3 point will lift with no load on it slower than usual. It will also hold a load with no drift down once up (if you lift load by hand). I have replaced the...