Elliott in GA's latest activity
-
Elliott in GA replied to the thread Flail mowers on a BX.Italy - many of the smaller, high quality flails are made in Europe. Again, a 3 pt. finish mower will do anything and more (rear... -
Elliott in GA replied to the thread Flail mowers on a BX.Del Morino flails have a good reputation. https://messicks.com/new/model/del-morino-funny-top-series
-
A flail mower is not a finish mower, and you'll have run over the grass with the tractor tires twice before mowing, but they work. I...
-
Elliott in GA replied to the thread Flail mowers on a BX.You also may want to consider a rear discharge 3 pt. finish mower; it might be less expensive for the same or better cut (presuming that...
-
Elliott in GA replied to the thread Box Blade.We have a very steep short (the steep part) gravel driveway at our property in north Georgia (where the tractor lives). During heavy...
-
Elliott in GA replied to the thread PIT masters.Well, I am a salt and pepper smoker for most things, but here are two rubs that I use: Pork Ribs = 1TBS cumin, 1 TBS paprika, 1 TBS...
-
Elliott in GA replied to the thread PIT masters.As answers are not flying in, you could make the pork loin (better if the bones are still attached) like reverse seared pork chops...
-
Elliott in GA replied to the thread PIT masters.Turn the Pork Belly into Burnt Ends - lots of recipes/youtubes on the net. They all yield something similar. I made Burnt Ends with a...
-
Elliott in GA replied to the thread Rear tire fill - your thoughts appreciated.Windshield Washer fluid has been used for many, many decades in tractor tires without any issues. It is cheap, and it does not cause...
-
Elliott in GA replied to the thread Box Blade.Why not look at a Tractor Supply 60 inch box blade. It is made in the US (probably Tarter?), and it is under $1,000 new (you $900 was...
-
Success! After about 100 times of trying to slip the shaft into place, I got out the borescope and looked in. The coupler had come loose...
-
Elliott in GA replied to the thread Kill switch.I should also have noted that the tractor and all related equipment are under a 30 x 30 shed, and the shed has an electric fence all...
-
Elliott in GA replied to the thread Kill switch.This topic comes up from time to time. You realize that a thief is not planning to drive away in your slow tractor. A thief will come...
-
I had the good fortune of massively quieting the metal panel doors for my future shop with these butyl sound deadening mats. It even...
-
Elliott in GA replied to the thread Quieting your garage doors.Cool - good to know. FWIW, I installed the replacement rollers below; they are much quieter. They also come with a lifetime warranty...
