ejb11235's latest activity
-
ejb11235 replied to the thread Debating purchase of a used BX2830 snowblower.The BX2830 is a snow blower. I own a BX23S and have put just over 200 hours on it. I've updated my initial post and the thread title to... -
Looks like someone got carried away with the red paint when painting the pump and didn't apply any masking to the black wire. Scrape a...
-
ejb11235 replied to the thread What did you do to or on your Kubota today?.This weekend I purchased pallet forks and a rock bucket for my BX23S. I was lucky that one my semi-local Kubota dealerships is a Redline...
-
-
ejb11235 posted the thread Debating purchase of a used BX2830 snowblower in Implements & Attachments.I have an opportunity to purchase a used BX2830 snowblower for $5300. This includes the blower, the quick hitch, and the PTO shaft, so...
-
ejb11235 reacted to GreensvilleJay's post in the thread Are all pallet forks created equal? with
Like.
All of what Torch said !!! YES YES YES I have a set of HLA 42" pallet forks rated for 900# for my BX23S and they work GREAT ! When... -
ejb11235 reacted to TheOldHokie's post in the thread Hooking up third function, rear remotes, and a backhoe line. with Like.
If using a traditional valve you willbwant PB in addition to tank. Dan
-
Thats an SAE-08 oring boss port and the gold standard for hydraulic system pressures up to 9,000 PSI. Tighten the coupler to 40 lb-ft...
-
ejb11235 replied to the thread Hooking up third function, rear remotes, and a backhoe line..Good point. Thanks. My specific interest in this is for eventually installing rear remotes for top 'n tilt. So other than curiosity, I...
-
ejb11235 replied to the thread Backhoe hydraulic connection advice.This is incredibly helpful. I have seen mention of these "PB sleeves" and couldn't figure out what they were. Now I know.
-
Good question - here is a short but incomplete answer. In a vanilla valve there are two low pressure tank cores inside the valve which...
-
ejb11235 replied to the thread Hooking up third function, rear remotes, and a backhoe line..Oh wow. I'm glad I asked. And thanks for the explanation. I think the service bulletin explained why it's ok to drive the PB port on...
-
ejb11235 replied to the thread Hooking up third function, rear remotes, and a backhoe line..I just read the Kubota service bulletin that someone posted a link to. My understanding is that the o-rings in this specific application...
