Recent content by EggerDE

Hey Russell, thank you very much for your help! I guess I made a mistake in my first post, mentioning the left arm. The right arm is broken, the one which also has the two threads for attaching this metal bar for the lever. I have to look into this kubota website, kpad - it seems to be very...

Thank you for the quick response. I ordered one arm. However, after searching a little bit more in the online diagram I found two numbers. 66621-36743 and 66621-3674-0, which is also mentioned in my repair manual. I cannot find the second part and I am wondering if both numbers just indicate...

Hi there from Germany, yesterday I was out in the forest and wanted to take home some firewood in a bucket with my B4200D, which made the left lifting arm snap in half at the hydraulic shaft arm. I guess it was about 300 lbs wood + 100 lbs for the bucket, being 400 lbs in total. I wanted to...

So I finally managed to connect the front power lift with the hydraulics. It is possible to operate the single action cylinder with the original hydraulic lever. Unfortunatelly the mechanics of my power lift now interfere with the tires, if I steer in a steep angle. I guess I have to make some...

I just wanted to add the final ROPS which was done by a professional on my request. It is basically a replacement of the cover of the backward PTO and is fixed with 6 rather large screws, which also hold in place the 3 point lift mechanics. I added a seat belt, so I hope to be now a little...

Ok, so a BSPP 1/2" in reality is a ISO 228 1/2", which is also known as Din G 1/2" in Germany - did I understand this right? I am just happy it fits and I found it in a Web shop here, it was sold there under the label "type inch, G 1/2" "

Hi there, Last weekend I got my hydraulic supplies and could finally confirm our assumption of a Din G BSPP 1/2" as the thread size of the hydraulic connection. I was a little bit scared at first because after one rotation it was really hard to put it further in. But then I tried a little bit...

Ok, I asked Gemini/ChatGPT and it is possibly a G 1/2". Could that be true?

Ok, my front power lift just arrived. I want to connect it now to the hydraulic power takeoff. I wonder if anybody can confirm the diameter I need for my hydraulics to screw into this takeoff. Originally I thought it would be 1", but this seems wrong. I measured the diameter of the screw...

Hi there, just wanted to give a small update. Unfortunatelly I only can visit my small machine on the weekend. I managed to unmount the knob, as I wanted to clean it out. However, after I had it removed from the tractor it turned around easily and smoothly. After turning it some times I built...

Wolfman, Russel King, thank you very much for your reply. I think I try to start with a single action cylinder for lifting with a front power lift. As I understand, for this, I only need to connect the lifting cylinder with the three point outlet. I think its very convenient using the...

Hi folks, I want to add a front power lift to my Kubota B4200D to be able to lift some counter weight or a transport box etc. I figured out I have a plugged knob below the seat, where I can take oil from. However, it is not completely clear to me and my friend (hydraulic professional), how it...

Hi, last weekend I was driving on my property into a region heavily overgrown with bushes and weeds. The region usually has no inclination at all. Within a matter of 2 seconds I found myself on a very steep inclination - probably some ants or other anymals build up a little hill waiting there...

Hi there fellow orange tractor owners, Since roughly 3 month I own my B4200D and I am working on becoming familiar with this powerful little machine. This weekend I thought I make something good and grease all the grease zerks. I did all of the zerks in the manual, but there are also two...