Dustyx2's latest activity
-
DI wouldn't think the brake plate is the problem. If it was locked it wouldn't have allowed the PTO shaft to rotate in the first place...
-
DDustyx2 replied to the thread BX 23S PTO damage.I'm with you. Likely the PTO shaft was too long and bottomed out when the mower was set down. I wouldn't think that brake would have...
-
DDustyx2 reacted to GreensvilleJay's post in the thread Need help removing this part from bushhog with
Like.
It looks like it should 'just' pull off... -
DTry to “jump” the starter positive cable to the solenoid spade terminal and see if the starter will reliably engage and crank the...
-
DDustyx2 replied to the thread Lose bolts The bolts.They also have yellow! I think it was 620?
-
DWholy mud batman! A pressure washer would really help!
-
DDustyx2 reacted to JSum's post in the thread 23S starter burned up, found the wire to the solenoid is always hot with Like.
It's fixed! Maybe I made a rookie mistake.... I went back and looked at the owners manual and the WSM and I don't see anywhere a picture...
-
DDustyx2 replied to the thread Hydrologic leak.Totally depends on your mechanic skills and comfort with tearing things apart. I and I'm sure many others have tackled this themselves...
-
DDustyx2 replied to the thread Good running to bad in an instant.No separator unless someone added one. I have a bulk tank with a separator so no water issues in my equipment.
-
DDustyx2 replied to the thread Good running to bad in an instant.Owner of a BX22 so the TLB version of your BX2200. First thing, when you turn the switch on do you hear the fuel pump clicking? If you...