Dustball's latest activity
-
DDustball replied to the thread M6800 Cab Roof with AC ripped off.An electrically powered AC will draw substantial current, far more than your tractor's alternator can put out. Firefight100's eBay...
-
DDustball replied to the thread long range weather procrastinators.Three winters ago we had the third snowiest winter on record going back 140 years. I had enough of using my ATV w/plow so I bought my...
-
DDustball reacted to trikepilot's post in the thread Help with finding "quality" valve handle boots with
Like.
Drive shaft (CV) boots seem to work well for anyone else looking for a similar solution. It was a 2min install and I have one as a... -
DDustball replied to the thread Finding Kubota Discontinued Parts.Agreed. Measure the existing retaining ring dimensions and find one at McMaster.
-
DDustball replied to the thread 23S starter burned up, found the wire to the solenoid is always hot.Here's the wiring diagram pertaining to the starter on the BX23S. It's very straightforward so there isn't too much to check. Battery >...
-
-
DDustball replied to the thread Kubota Treadle pedal adapter.Video of it in action-
-
DDustball replied to the thread Main 9 wire connector B7100HST old.I was going to suggest the Deutsch DT Size 16 8-position and the DTHD Size 12 1-position connectors. Split the heavy gauge wire off from...
-
DDustball replied to the thread Main 9 wire connector B7100HST old.What are the gauges of the wires and qty of each gauge in that connector?
-
DDustball replied to the thread Main 9 wire connector B7100HST old.There's no reason you have to stick with the original connectors- cut them off. Plenty of aftermarket options out there.
-
DDustball replied to the thread BV 4160E actuator 12v showing 0v.Double check all your electrical connections.
-
DDustball replied to the thread Low oil pressure.Before worrying about what comes next, first find out what the actual oil pressure is using a mechanical pressure gauge. It could just...
-
