DrHz's latest activity
-
DDrHz replied to the thread Newbie with an L35.Good point, will do. Got to drain the stupid oil out of first when I get back. Then I will pull that out and inspect it.
-
DDrHz replied to the thread Newbie with an L35.Ok Dan that is a great looking setup. My assumption is that the flow is as above and you are using the valve to create resistance to...
-
-
DDrHz replied to the thread Newbie with an L35.If the relief valve is stuck and I crank it down so that it doesn’t relieve pressure it should in my mind at least cause the pressure to...
-
DDrHz replied to the thread Newbie with an L35.huh thats a valve?? Ok will check on that one. First things first..... PSA: If you are going to try and pressure wash your transmission...
-
-
DDrHz replied to the thread Newbie with an L35.Figured I would at least take the panel off and see if I could see that valve and if it was turned. Well looks like nobody has been in...
-
-
DDrHz replied to the thread Newbie with an L35.Alright well that gives me some things to look at. I will be traveling until Friday, so I wont be able to get too deep into it until the...
-
-
DDrHz replied to the thread Newbie with an L35.Are you talking about the relief valve that PoTreeBoy was referring to in the post above yours, or a different one? When I am sitting on...
-
DDrHz replied to the thread Newbie with an L35.I just did the PB pressure with it capped off, which is low. Forgive my lack of konwledge on this, but that would cut this relief valve...
-
DDrHz replied to the thread Newbie with an L35.Gotcha will do
-
DI meant on the requested and any future hydraulic pressure tests you do, please post a picture of the gauge position. That way there is...
-
DDrHz replied to the thread Newbie with an L35.Alright not much exciting, kinda what I expected here is the result of placing the gauge at the PB with it capped off. Looks like 700psi...
-
-
DDrHz replied to the thread Newbie with an L35.Fout posts up from yours. First image is my gauge that I am using Second pic is where the Tee is. I removed the line from the P on the...
-
DDrHz replied to the thread Newbie with an L35.gotcha no tee directly at the pb at 2000. Will do as soon as I can. Got a cap on Amazon coming overnight. Should be able to post tomorrow.
-
DDrHz replied to the thread Newbie with an L35.So, I was responding to your comment to not use a tee on the PB, and I said I only have a Tee. I do not have a straight. I would have to...
-
-
DDrHz replied to the thread Newbie with an L35.I have a Tee I do not have a straight as you said "no Tees" on the PB. I only have the T
