DONLI's latest activity
-
DONLI replied to the thread Finally, a Replacement Battery.I havevused WM batteries in my boats, RV, ZTmower, and have one on amantainer and all of them are 2 to 5 years old. I have never nad one... -
DONLI replied to the thread SEAT SWITCH.That is how I did mine. Don
-
DONLI replied to the thread What size wrench. Large locknut on adjuster bar for boxblade.30mm
-
DONLI replied to the thread Trailer Advice.One thing that is a must have if you get a trailer with ramps is stabbleizer jacks onthe back (been there don that ). If I was in the...
-
DONLI replied to the thread Wheel and tire wt.Thank you all for your input! I have researched using a ballist box and settled on filling tires with aintifreeze and it will give me...
-
DONLI replied to the thread Wheel and tire wt.My property ( lawn ) is not level if I try to go up hill ( not steep ) with only 50 to 100 lbs in the loader I have to use 4wd. If I...
-
DONLI replied to the thread Wheel and tire wt.From what I found it will weigh between 225 to 239lbs per tire and wheel. Antifreeze will add about 279 lbs per tire, to a total of 504...
-
Can anyone tell me how much a 15x19.5 R4 tire and wheel weigh without ballest? Thank you Don
-
DONLI replied to the thread Need help removing this part from bushhog.PS. Try a lot of Big Break spray oil. Don
-
DONLI replied to the thread Need help removing this part from bushhog.Thats what it looks like to me also, (Just pulls off) Try a pry bar on the back side. Don
-
DONLI replied to the thread Will an L3560 w/ BH77 fit in my garage without drama?.JUST MY 2C, BUT MY FIRST TRACTOR WAS AN l2010 fel bh, and I had 16.5 acres of hilly(some steep) ground an it did everything I wanted...
-
DONLI replied to the thread Hydraulic top link.i have used ebay for hyd. cylenders before and have not had any problems with them. Don