Recent content by Da old guy

I am inclined to believe you Wolfman...we are talking about snow and you are are from Northern Idaho. And I do like the positive traction of the chains. So. I use the B8200 with other implements and need to adjust for width. Tell me how I would adjust for width with bars in the place of my...

Out to the shed to read the side of the tire with a flash light: front 24x8.50-12, rear 13.6x16. Bought chains and 2" axle extenders a couple of years ago when I started to plow out to the state road. Ag tires permitted me to only plow down hill on icy roads and sooner or later you have to go...

Are they the same? No, wait. that's the wrong question. Of course they are not the same. The right question is will they work? I'm looking for 12.4x16 and 6-12. Those are 11x16 and 12x5.

OK, I give up. Does anyone know where I can find after market rims for my B8200? 12.4x16 and 6-12. Not really interested in getting rims that are used/rotted. I want to change from turf to ag and finally take my chains off that have eaten TWO of my three point lift bars. Don't understand why...

Thank you for your thoughts. Mystery solved. Manually eased shift linkage past a tight spot and it fell into neutral. Made sure PTO lever for mower was fully disengaged and she started right up. Turning off at the key in an emergency made me overlook the position of the PTO lever when I tried to...

Thanks Kubotasam. I like it: rationale, simple, and very possible... but not correct. Have looked at linkage and nothing there that didn't start out at the factory. Is there a device attached to the pedal assembly or the linkage that tells the ignition that I'm not good to go and is blocking the...

Greetings, First post and I'm struggling. Cutting near top of bank and B2100 HST pedal got stuck in foreward position. Moving foreward would have led to roll over. Put in clutch and tried to push heel down to get in reverse. No go. Turned off key and used beloved B8200 to pull 2100 to safety...