Recent content by Cobra 7

Yes My tractor was set up for PB for a backhoe (unfortunately for me the previous owner sold the backhoe) from the FEL. All I had to do was run the FEL PB to my P40 valve then out the P40 PB to back where my original PB hooked into the tractor.

Thanks for the clarification.

That clears up a lot with me, I had assumed that tank was continuous flow as the fluid had to go somewhere on open system. So the tank return from AUX would not have to fight the tank return from FEL. Thanks

Rear remotes are supplied by FEL power beyond. All 3/8 lines for supply from tractor to FEL and FEL to rear remotes. Tank return from FEL is 3/8 (which is where I would TEE into for rear control tank return). All lines to working cylinders (top link, side link) are 1/4.

96 Kubota L2350DT w/ loader I added rear remotes to my tractor and was contemplating using 1/4 vs 3/8 for the tank return line. The tank return from loader is 3/8 and runs to the rear fill plug behind the seat. I was thinking of breaking that line and installing a tee for the rear controls tank...