chim's latest activity
-
chim replied to the thread l2501 HST won't move forward or reverse.You got off easy. From personal experience, I know that can happen and I'm happy for you that it's resolved before you were as dumb as... -
I wonder if they spec it only by HP with no consideration for weight. Kind of like when I was specing out a flail mower. HP wise I was...
-
chim replied to the thread l2501 HST won't move forward or reverse.You kicked the shifter out of gear.
-
chim replied to the thread FDR2584 Finish Mower HP requirement.My L4240HSTC shows 35HP on the PTO. I do run a 90" that is 100# lighter than the LandPride you mention. This match-up works well. I...
-
chim reacted to Rosohatica's post in the thread What did you do to or on your Kubota today? with
Like.
I mounted myself a toolbox, which I was desperately missing. Now there is a room for all ! -
chim replied to the thread Snow blower question.My guess is also a weld to balance the impeller. It's at a good place (back of the blade) so nothing should affect it.
-
chim replied to the thread How to measure fluid level.It helped me see the fluid after I sanded the metal dipstick to create a "grain".
-
chim replied to the thread Dropping an implement with engine off.Not understanding that because the FEL can be lowered just as slowly whether the engine is running or not. Just this week I had a couple...
-
chim replied to the thread 2846A discharge chute rotate.Have you eliminated the controls as the source of the problem?
-
chim replied to the thread What did you do to or on your Kubota today?.Thanks for the update
-
chim replied to the thread What did you do to or on your Kubota today?.Nice haul S-G-R! I'd appreciate more info on the fenders. If someone on this side of the border wants 'em, it becomes a DIY project...
-
chim replied to the thread Dropping an implement with engine off.Should have mentioned that when removing the FEL the very last thing I do is remove the hoses. This is with the engine off and the the...
-
chim replied to the thread Dropping an implement with engine off.I always remove and install the FEL with the engine shut off. Implements on the 3PH get done with the engine running or stopped if they...
-
chim replied to the thread What did you do to or on your Kubota today?.Had this with Stihl oil, but since the fix is so easy i will continue to use it...
-
chim replied to the thread What did you do to or on your Kubota today?.We put something similar in for a project where we added a small compressor room. It was to handle rain from the additional roof. The...