Chanceywd's latest activity
-
Chanceywd reacted to leetdog's post in the thread RESOLVED: L2501, using backhoe to carry rocks, got jammed, now hydraulics are stuck? with
Like.
I feel ya, but I like it! Nice tractor ! -
Chanceywd reacted to chim's post in the thread RESOLVED: L2501, using backhoe to carry rocks, got jammed, now hydraulics are stuck? with Like.
VERY soon after buying a new L3200 in2012, one moment of carelessness resulted in a small dent in the LF corner of the hood. In the 6...
-
Chanceywd reacted to S-G-R's post in the thread RESOLVED: L2501, using backhoe to carry rocks, got jammed, now hydraulics are stuck? with Like.
The hood? Loader, grill and hood, that's three. Should be good to go now.
-
Chanceywd reacted to S-G-R's post in the thread RESOLVED: L2501, using backhoe to carry rocks, got jammed, now hydraulics are stuck? with Like.
Glad you got it figured out and updated the thread with the fix.
-
Chanceywd reacted to BBFarmer's post in the thread RESOLVED: L2501, using backhoe to carry rocks, got jammed, now hydraulics are stuck? with Like.
Thanks brother, you to!
-
Chanceywd reacted to Runs With Scissors's post in the thread RESOLVED: L2501, using backhoe to carry rocks, got jammed, now hydraulics are stuck? with Like.
It does not sound like you abused anything. I regularly use my 77 to move/shove/displace/lift rocks and things. Sounds to me like your...
-
Chanceywd reacted to TheOldHokie's post in the thread RESOLVED: L2501, using backhoe to carry rocks, got jammed, now hydraulics are stuck? with Like.
You had me confused for a moment. JFYI, you did not check and clean any valves. Those are quick disconnects. Dan
-
Chanceywd reacted to leetdog's post in the thread RESOLVED: L2501, using backhoe to carry rocks, got jammed, now hydraulics are stuck? with Like.
I checked the return valve about 6 different timed in the woods. Once I got it on flat ground and checked it out, i completely removed...
-
Chanceywd reacted to TheOldHokie's post in the thread RESOLVED: L2501, using backhoe to carry rocks, got jammed, now hydraulics are stuck? with Like.
EZ-PZ Your return line is not fully connected. The 3pt lever is not in the full down position.
-
Maybe drill and tap a hole for a grease fitting?
-
I hit that point around 60. 🙄 Dsn
-
Good point: Atlas 12k lb lift. At +70 years, I'm done crawling around on the ground.
-
Chanceywd reacted to North Idaho Wolfman's post in the thread MX6000 HST cruise lever not holding.....Fixed with Like.
Look and see if this spring is still in place.
-
Chanceywd reacted to emac's post in the thread MX6000 HST cruise lever not holding.....Fixed with Like.
Got it fixed. I got under it today and took my time looking at how it worked. I must have taken a stick into the spring shown in the...
-
Chanceywd reacted to North Idaho Wolfman's post in the thread MX6000 HST cruise lever not holding.....Fixed with Like.
Yep, that was the spring that I pointed to. ;) $9 spring TC860-55820