Caden's latest activity
-
Caden reacted to PHPaul's post in the thread Adapting implements to Cat 1, 3-point quick hitch for bx-2680 with
Like.
That's the sort of issue that has always made me question the usefulness of "quick" hitches. I can hook up any of my traditional... -
I have a lot more hours on older loader tractors without power steering than I do on my L. Without power steering and with a moderate to...
-
Caden replied to the thread L4701 steering question.Evening, Not to discount your issue in any way, but in general you shouldn't be steering without moving in the first place, especially...
-
Caden reacted to Bee-Positive's post in the thread Stripped Starter Bolt on Kubota TG1860 with Like.
Hold the head of the bolt (starter side) with a box wrench or other appropriate means, use a chisel to split the nut off the bolt. Done...
-
Caden reacted to Russell King's post in the thread Stripped Starter Bolt on Kubota TG1860 with Like.
Here is what I would try: Find out if the nut is rotating with the bolt by trying to loosen the bolt and looking at the nut. If the nut...
-
The starter is probably bad. I had similar issues with my L185F and ended up with replacing the battery and cables which helped some...
-
Inspect the ground from battery to frame - clean / tighten / replace as needed. Very common issue. Inspect / clean /replace all...
-
I had the same problem asking for a #1157 bulb. What year/make/model is the vehicle? I asked where the small automotive bulbs were...
-
Caden replied to the thread Oil Capacity.Mine is right at the full mark with a little over 3 including filling the filter. No idea what the manual calls for.
-
Caden replied to the thread Does anyone else find Car/Truck headrests to be uncomfortable?.Well, thanks everyone. Good to know I'm not alone in thinking this.
-
Keep your tractor and go buy something appropriate for land clearing. Doesn’t need to be new. Bulldozers work great for leveling...
-
-
Caden reacted to Runs With Scissors's post in the thread Second-guessing my L4060 LE purchase with Like.
I am with @Caden on this. To me, it sounds like you need a different style/type machine altogether. Dont get me wrong, I love my...
-
Caden reacted to GeoHorn's post in the thread Does anyone else find Car/Truck headrests to be uncomfortable? with Like.
I found this problem when I bought my 2012 Ram 1500….and ended up pulling the headrests up.out of the seat-back and placing their “rods”...
-
Caden reacted to ken erickson's post in the thread What am I missing, 540cc Briggs and Stratton engine running rich with Like.
I was thinking that same thing, going to order a OEM rebuilt kit for the Nikki and if nothing else I will have a good spare.