Bsromine's latest activity
-
Congratulations! Very nice! (y) Time to update your signature. -
Growing up and on into my adult years, I operated a MF 165. A 60s model that was just a tad older than me. Once I bought my own little...
-
-
Bsromine replied to the thread Slip clutch.Appreciate it man. Hoping I like it. Was a big check to write if I dont lol
-
I just came back from our property in north Georgia today; my RCR is ~250 miles away. If I remember correctly, the springs are...
-
Bsromine replied to the thread Slip clutch.maybe a bigger cutter eventually. I don’t really need anything wider than the MX as I only have 13 acres of horse farm. I already had...
-
You want a bigger, stronger cutter for your new MX. LP says an RCF2772 would work - 3 inch rated. Maybe, the design has changed over...
-
Bsromine replied to the thread Slip clutch.I’ve got a new mx5400 coming in the morning and was hoping to get that rotary cutter clutch slipped and working correctly so I could use...
-
Bsromine replied to the thread Slip clutch.The manual is iffy tbh. There is a shear bolt in it and not whatever than conical thing is. And the side covers they talk about are...
-
@Bsromine I edited the post above this one (#10)
-
Sorry to continue but that is pretty much exactly what I tried to describe getting off my tiller by driving the yoke onto the input...
-
Bsromine replied to the thread Slip clutch.
-
-
Bsromine replied to the thread Slip clutch.Yeah. Can’t move it at all. And I did note in the manual that it shows no clip. Assuming the safety chain is the fail safe in that...
-
Bsromine replied to the thread Slip clutch.Thanks. I already have it back together so I can use it, but the part I’m trying to get off is the part this guy is pulling off at...
-
Pictures of the problem may help get suggestions. On my tiller when the drive shaft was rusted to the tiller’s input shaft (which is...
-
Bsromine replied to the thread Slip clutch.I was able to get the sheer bolt out and remove all the bolts and springs. Having done that I can get the PTO shaft off and have...
