bsamot69's latest activity
-
Bbsamot69 replied to the thread L4400 fel not working.No third function , the quick connects on loader valve have color coded rubber plugs on valve and connector. They matched so I...
-
Bbsamot69 replied to the thread L4400 fel not working.I sent reply, I guess it didn't send. That is correct, those are the readings I got for pressure and flow There is no change in...
-
Bbsamot69 replied to the thread L4400 fel not working.That is what happened.
-
Bbsamot69 replied to the thread L4400 fel not working.Okay, I will do as described. Thank you
-
Bbsamot69 replied to the thread L4400 fel not working.I'm avidly reading your comments. What next step should I take?
-
Bbsamot69 replied to the thread L4400 fel not working.So the flow on my tractor of just under 3 gallons in 20 seconds indicates it meets the 9 gpm requirements?
-
Bbsamot69 replied to the thread L4400 fel not working.I ran the tractor at full throttle for 20 seconds and got about 3 gallons. If I ran it at full throttle for 60 seconds I should get...
-
Bbsamot69 replied to the thread L4400 fel not working.If there is a suction side leak, will the discharged fluid be foamy? What ways can I confirm worn pump?
-
Bbsamot69 replied to the thread L4400 fel not working.What would cause the restricted flow or low flow?
-
Bbsamot69 replied to the thread L4400 fel not working.I reran flow test and it came to just about 3 gallons. That must be good news..
-
Bbsamot69 replied to the thread L4400 fel not working.Okay
-
Bbsamot69 replied to the thread L4400 fel not working.The pressure jumps up to just over 2600 psi. I shut off tractor pressure immediately drops to 0 psi. I ran tractor at 1800 rpm for...
-
Bbsamot69 replied to the thread L4400 fel not working.Thank you for your patience. I'll get the appropriate adapter and move forward mess free, LOL. The loader valve being the joystick...
-
Bbsamot69 replied to the thread L4400 fel not working.Well I'll be darned, Amazon gauge 10 bucks, delivered in a day, today . Though , the fittings were not compatible. I went ahead with...
