bobnic's latest activity
-
Bbobnic replied to the thread Replace BH92 with mini-ex?.The OP is not considering the smallest mini-EX. Obviously a giant excavator is going to dig out stumps faster than any mini-Ex, but is...
-
Bbobnic replied to the thread Replace BH92 with mini-ex?.I have never spent hours (or even close to an hour) digging out a stump with my KX033 mini-EX. Obviously it would take longer with a...
-
Bbobnic replied to the thread Replace BH92 with mini-ex?.I have a KX033-4 Kubota mini excavator and I love it. I've pulled stumps, dug out boulders, made trails through the woods, safely...
-
Bbobnic replied to the thread LX4020 ROPS lighting help.Wrong, you apparently do not know about the "DC equation". MapleLeafFarmer is correct DC amps=watts/volts.
-
Bbobnic replied to the thread 1/2 mile drive in Michigan through a swamp.What did your neighbor use to maintain and plow the whole driveway? That should give you a good idea of what equipment you'll need.
-
Bbobnic replied to the thread Never owned a Tractor.For my LX4020 I have a LandPride GS1560, which LandPride calls a grading scraper and others call a land plane. I have no experience...
-
Bbobnic replied to the thread My Next Stupid Question regarding PTO power..Actually the PTO hp relative to the engine HP is not a fixed percentage and does vary somewhat brand to brand and also depends on the...
-
Bbobnic replied to the thread Never owned a Tractor.I have a LX4020 cab with the front commercial 64" snow blower and the larger R14 tires (filled). I can tell you I have yet to meet a...
-
Bbobnic replied to the thread Ditch cleaning help.With the Cyclone PTO blower I am mainly blowing leaves up hill into the woods. The hill varies from close to flat up to about 45...
-
Bbobnic replied to the thread Ditch cleaning help.That is exactly what I use to clean out the ditch on my 3/4 mile long driveway, a Cyclone PTO blower from Buffalo Turbine.
-
Bbobnic replied to the thread Bx 1800 draw bar.A proper top link is two threaded sections joined by a threaded sleeve which allows the length of the top link to be adjusted...
-
Bbobnic replied to the thread Functional upgrades to the M6060 including sprayer controls, LEDs, power distribution and more..That is a much cleaner (less busy) and more stable design. How will you run the wiring and tube for the pressure gage, perhaps in split...
-
Bbobnic reacted to McMXi's post in the thread Functional upgrades to the M6060 including sprayer controls, LEDs, power distribution and more. with
Like.
I actually HATED what I did initially and can't bear to look at the photos. š Today I almost started over from scratch, but realized... -
Bbobnic replied to the thread Bx 1800 draw bar.Box blades connect to 3pt hitch so they can be raised and lowered. The draw bar has no lift function.
-
Bbobnic replied to the thread Recommendations on a brand and model of grease gun.You might look into the LockNLube grease coupler for your existing grease gun. It might be more accommodating of different zerk...