awesome's latest activity

  • awesome
    awesome replied to the thread Mistery rock bucket.
    So far so good. It's heavy duty, good quality. It did a good job picking up logs. I also had a mix of sand and paving stone to screen...
  • awesome
    awesome replied to the thread Mistery rock bucket.
    Shipping company says 320lbs. Works great so far.
  • awesome
    awesome replied to the thread Mistery rock bucket.
    No question. Just wanted to show my new bucket :)
  • awesome
    awesome posted the thread Mistery rock bucket in Implements & Attachments.
    I just got this new rock bucket. I found it on kijiji in the ottawa area. Once I contacted the owner, I found out it was actually a...
    • PXL_20251009_175301857~2.jpg
    • PXL_20251009_175310164.jpg
  • awesome
    awesome replied to the thread L2502 3ph.
    Take my money! I want it. But I guess you're in US? Shipping to Canada would be a pain
  • awesome
    awesome reacted to Runs With Scissors's post in the thread L2502 3ph with Like Like.
    Looking good my man! ;) I’m gonna try some sort of “adaptation” of this design too. @Russell King those studs are a fantasic idea...
  • awesome
    awesome reacted to Russell King's post in the thread L2502 3ph with Like Like.
    You can just install studs in the threaded holes and let the pins slip over the stud/dowel. I would use this style Actually you could...
  • awesome
    awesome replied to the thread L2502 3ph.
    Interesting. I'll have to consider this then. I'll update my design
  • awesome
    awesome replied to the thread L2502 3ph.
    Gonna try this out it the field today with my blade. I left the bolts in just to protect the threads, but they are not holding anything...
    • 1000009242.jpg
    • 1000009243.jpg
  • awesome
    awesome replied to the thread L2502 3ph.
    The caps wont work because no matter the rotation, the hole is blocked by the casing of the tractor. I tried doing a very rough...
    • 1000009230.jpg
  • awesome
    awesome replied to the thread L2502 3ph.
    exactly. but I wanna keep my original pegs in case I need to revert back. A new set is 50$ CAD. So I might just make my own with steel...
  • awesome
    awesome replied to the thread L2502 3ph.
    There will be the pto and the hitch in the way. But that can be solved easily. I might try something today after work
    • 1000009219.jpg
  • awesome
    awesome reacted to Runs With Scissors's post in the thread L2502 3ph with Like Like.
    I’m liking these idea's you have. I don’t have my tractor “at the ready”, to do any measurments, but if there is not an interference...
  • awesome
    awesome replied to the thread L2502 3ph.
    Or instead of welding on a new pair of pins, could I use a rod of mild steel attached to square tubing that slide into each other with a...
  • awesome
    awesome replied to the thread L2502 3ph.
    Haha. I'm gonna call my dealer to see how much another set costs. And I'll get a turnbuckle. I'll keep the thread updated
Show older items
Top Bottom