Recent content by Aris

OK, I’m back from the island with some videos that hopefully will help! I hope the upload is made right it’s my first one! Videos were taken in the garage where it is mothballed for winter The first is with the engine just started cold (60f) and I can shift, with no grinding. The RPM is in...

The second one worked fine, whow it is amazing! better late finding it than never! again thanks a million!!!!

Hey Torch really thank you, yes at 75 I'm certainly old but still work by myself on classic cars since too many years ago! I bought the D7100D by choice since it is a classic as well and I love using it and of course maintaining it to the degree I can since I only have worked on gasoline cars...

First thank all of you for volonteering your valuable assistance!!! The B7100D is on an island on the Argean and weather permitting I will go there next weekend and as suggested will make a video of the problem. I'll ask my son to load it on You Tube and will post here the link. It is good...

THANKS FOR THE HELP, I HAVE EXHAUSTED ALL CLUTCH RELATED ISSUES. YES IT SHUTS OFF PROPERLY WHEN PULLING THE LEVER BACK SO AGAIN IT SEEMS LIKE A STICKING GOVERNOR AND/OR INJECTOR PUMP. WHERE CAN I FIND INSTRUCTIONS ON DISMANTLING THE GOVERNOR? ON IT'S SPRING, IS IT A NOS SPECIIFIC SPRING WHERE...

THAT sliding rack SEEMS TO POINT IN THE RIGHT DIRECTION, THANKS! I HAVE DOWNLOADED A MANUAL FROM manuals 247.com IN THE PAST, BUT IT'S DETAILS ON THE INJECTOR PUMP ARE SIMPLY INADEQUATE. CAN YOU PLEASE POIN ME IN THE RIGHT DIRECTIONS OF A MANUAL TO TACKLE THIS?

I HAVE TRIED OUT DISCONNECTING THE LINKAGE COMPLETELLY AT THE ENGINE/PUMP END, BUT THE RPM DID NOT COME DOWN. TO MY AGNOSTIC SELF, IT SEEMS THAT IT GOES UP WHEN THE ENGINE REACHES OPERATING TEMPERATURE.

THANKS FOR THE HELP! Have you checked the linkage for the clutch? YES REPEATEDLY, NO PROBLEM THERE AS for the engine increasing as it gets "warm" - I am hoping the throttle is moving without you moving it. NO, IT IS NOT AND IT RETURNS TO FULL RETREAT IF you pull/push the throttle back...

Thanks for the reply, Dan, I apologize but my English is not that good. The problem I described is not while the tractor is moving, but when it is stationary/still. I start it from cold and the RPM is low, seems perfect to me and I can shift in any gear with almost no grinding. This is how it...

Hi all! I'm a newbie in this forum with a classic B7100D that is grinding when changing the gears. The symptom varies: when cold the RPM is slow and the gears change with little grinding, but once it warms up, the RPM goes very high to the point that to change gears, I need to shut the engine...