Recent content by Ammobeetle

If you are in float and dig in or get to much snow in front you will lift the front wheels, I often have to pull it up out of float in order to get traction on the front to turn. Rob

Looks like you might have 2 power supplies connected, it only needs one and a 2nd can cause problems. 1. Looks like a POE Injector, you use this if you want to power the device over the ethernet cable. 2. Looks like a power supply plugged directly into the device. I would remove the POE injector...

The unit at the house is set as A 'Master' ethernet port connected to internet? Remote unit Set as B, what is connected to the ethernet cable? The random flashing should be network activity if a device is connected. If you have a switch connected to the bridge you should be able to connect a...

There are lots of factors, anything over 100' is great. Put a couple of walls in between and you cut that in half. Metal siding and you loose ~90% of your signal. Easiest install if you have a line of sight option would be a point to point WiFi extender: Amazon.com: 5.8G Wireless Bridge PTMP...

WiFi will not go 600ft (reliably) With my steel buildings I ran fiber optic to my shop 175'. (Buried 1.25 conduit) Used a media converter on each end to turn fiber into a 1gb port. Put a switch and access point in the shop. If you don't have an ethernet port on your Starlink get one, great for...

I was looking at the Messick's guard until I saw the shipping price. I don't mind paying 'reasonable' shipping, but a company shouldn't be making shipping a profit center. Went with a Homestead.

Parking brake set and trans in N, think I'm going to have to bypass the switch.... Thanks for the input!

It's the factory air ride, Not finding anything in the manual I have, might need to look for another manual... trying to avoid playing with the wiring but definitely an option... Thanks.

I grabbed this one off of Amazon, "TY26583 Deluxe Steering Wheel Spinner Knob" same as the Kubota deluxe version at less than half the price. Have been very happy with it.

I have the air ride seat on the L4060HSTC, I need to keep the PTO running after I get off the seat. It wont flip up like the standard seat, is there a trick to it or do I need to bypass the seat switch? Thanks,

Full procedure in the operators manual for mine.

Usually a bleeder on the fuel filter, I'd purge it and see if the issue comes back. Procedure should be in your operators manual.

These work well for me, and a decent price, ~$23 flex spout and a nice vent. Hand grip well on the bottom helps pour. Plastic Product Formers Red Utility Jug - 5 Gallon Model Number: 3943 Menards® SKU: 2610644

Sure it's not a starter issue? I imagine it's warm enough in GA to not require glow plugs to start... I might be way off but that's what jumps in my head!

Have you confirmed battery voltage?