Recent content by 2Huskies

It seems to be working fine for me now!

I'm getting the account upgrade is required to view this post message for every post as well, but only if I'm logged in. If I log out, I can read all the posts just fine.

You are correct, it is the one on the right side. Very likely that this is your issue, but you can test it if you want with an ohmmeter. Just pull the switch off the tractor first, so you can depress the switch plunger by hand. Shouldn't be any continuity between the terminals and the metal...

I don't have anything to offer on the emissions warranty on the B3350. I do, however, remember reading the post you're referring to. It was on here 3 weeks ago (even though I would have sworn it was within the last week). Here's a link, if it will let me post it. If not, the thread title was...

There's also a possibility that the HST pedal switch is bad. At least that's what was causing the OPC fuse on my B3000 to blow.

I don't have an L series, so not sure if any of this applies to your problem, but I had the same issue on my B3000 with my front mount snowblower. On the B3000, the valve body is controlled through cables connected to the joystick. I did initially attempt to lubricate the joystick, thinking...

The drawbar on my B3000 measures 2" wide by 15.25" long, 1.25" thick.

So I ordered a replacement OPC controller that arrived today. Installed the controller, buttoned the tractor back up, fired it up and set out to mow. Mowed maybe 2/3 of the way down my 1/2 mile driveway, and the tractor died. Got out, checked the OPC fuse and found it blown, so clearly the...

Amen, Blkvoodoo! And the more computers and electronics they stuff into machines, the more aggravating they seem to get! I'd be happy to take some of your rain, as we have been pretty dry here. The new PTO switches did not solve my fuse issue. I didn't really hold out a lot of hope that they...

Yup, WSM is Work Shop Manual. If I had an electronic version, I'd send it to you, but I've got the paper copy. There are a total of 5 safety switches shown on the OPC circuit, as well as the key switch, stop solenoid relay, stop solenoid, battery and starter motor. The wiring diagram also...

Changing the fuse to a higher amperage rating does not help much, at least with my tractor. The municipality that owned mine previously must have had the same issue, as the 5 amp OPC fuse had been replaced with a 15 amp. Mine recently went from very infrequently blowing fuses to blowing them...

I have the same model tractor, and I have had the exact same issue this spring. I can be driving along, and it just stops dead in its tracks, for no apparent reason. I can't yet help you with a cause, but on mine, something is causing the 5 amp OPC fuse in the fuse box under the hood on the...