B219 Lift Cylinder Specs? UPDATE!

[Lil Foot]

Does anyone have the B219 lift cylinder specs?
Diameter of pistons & rams, extended & retracted length, diameter of pins, width of eyes at each end?

My lift cylinders gave up the ghost this last trip up to the high country, and I left without measuring the pertinent info. (doh!)
I was going to see if there were replacement cylinders available somewhere instead of rebuilding them again.
(this would be the third time that I know of)
I suspect they are worn to the point that new seals are lasting shorter & shorter intervals.
I can measure them next trip up, but I thought if someone had the specs, I might start my research early....
Thanks in advance!

 

[Dave_eng]

Does anyone have the B219 lift cylinder specs?
Diameter of pistons & rams, extended & retracted length, diameter of pins, width of eyes at each end?

My lift cylinders gave up the ghost this last trip up to the high country, and I left without measuring the pertinent info. (doh!)
I was going to see if there were replacement cylinders available somewhere instead of rebuilding them again.
(this would be the third time that I know of)
I suspect they are worn to the point that new seals are lasting shorter & shorter intervals.
I can measure them next trip up, but I thought if someone had the specs, I might start my research early....
Thanks in advance!

Kubotabooks at the following link has info for the B219 which I think includes part numbers.
B219

Dave

 

[85Hokie]

Kubotabooks at the following link has info for the B219 which I think includes part numbers.
B219

Dave

Dave,

that link cannot be found or?

https://www.orangetractortalks.com/forums/file:///C%3A/Users/David/Downloads/B219.pdf

this is the error:

this what you were shooting for?

(click to download pdf)

https://kubotabooks.com/AutoIndex/index.php?dir=Loaders and buckets/&file=B219.pdf

 

[Dave_eng]

Dave,

that link cannot be found or?

https://www.orangetractortalks.com/forums/file:///C%3A/Users/David/Downloads/B219.pdf

this is the error:

View attachment 123491


this what you were shooting for?

(click to download pdf)

https://kubotabooks.com/AutoIndex/index.php?dir=Loaders and buckets/&file=B219.pdf

Yes that is the material.
I must have done something wrong for my name "David" to appear in the link I provided.
Dave

 

[Lil Foot]

Yeah, I have that manual, but it doesn't have the info I'm looking for.
I was hoping someone had gone the route of replacing the cylinders with aftermarket ones & had already done some of the legwork.

 

[TheOldHokie]

Yeah, I have that manual, but it doesn't have the info I'm looking for.
I was hoping someone had gone the route of replacing the cylinders with aftermarket ones & had already done some of the legwork.

As I am fond of sayung - it aint rocket science. I dont have the data youbareblookingvlbfor but its easy to get off the tractor and you dont need an exact match. Ibam sure youvwill easily find replacements.

I replaced all four on my B1630 a couple years ago. Heres what I used and they should be very close to what you need. Current price will be around $350 for the vylinders and maybe $30 for any fittings you need. Magister is fast ans shipping is included in the price. Surplus Center is another source but they bang you pretty hard on shipping.

Dan

 

[parttime1017]

Yeah, I have that manual, but it doesn't have the info I'm looking for.
I was hoping someone had gone the route of replacing the cylinders with aftermarket ones & had already done some of the legwork.

HYDRAULIC CYLINDERS, 2" BORE X 16" STROKE... 26 1/4" CLOSED PIN CENTER DISTANCE...
NORTHERN TOOL #39042016...SURPLUS CENTER #9-4300-16

 

[Lil Foot]

Wow, Thanks! I will check them out.

 

[TheOldHokie]

Wow, Thanks! I will check them out.

Surplus Centet cant.seem to find that item number. Here is a 2 x 16 from Magister

2 bore x 16 stroke hydraulic cylinder, welded cross tube double acting cylinder | Magister Hydraulics

2" bore x 16" stroke cross tube hydraulic cylinder 3500 PSI. Heavy-duty hydraulics, 2-year warranty, free ground Continental US shipping. Magister cylinders manufactured using steel piston and steel threaded gland with wear rings for long life. Welded cross tube ends, honed cold-drawn tubing...

www.magisterhyd.com

Dan

 

[Lil Foot]

Alas, neither part number shows up.

 

[TheOldHokie]

Alas, neither part number shows up.

For SC go to double acting cylinders sectiom and use attributes to filter results.

Dan

 

[parttime1017]

Alas, neither part number shows up.

Sorry... I ended up using Ebay to purchase my cylinders. They came from Surplus Center thru EBAY.
The part numbers were in my notes and I didn't check to see if still alive. Price was cheaper thru Ebay.

 

[Lil Foot]

Got it.
I will be going back up where the tractor lives around the 13th or maybe sooner, and I will pull a cylinder off and bring it home with me for positive ID.

 

[Lil Foot]

I measured the lift & curl cylinders.

Lift cylinders:
Bore 2.000"
Closed length 23" (center of eye to center of eye)
Extended length 40"
Eye diameters (pin holes) 5/8"
Width of eye tubes 1 3/4"
Ram diameter 1 1/8"
Body diameter 2 3/8"

Curl cylinders:
All dimensions the same except for closed & extended lengths:
Closed length 17"
Extended length 28"

 

[Mallis_dad]

I measured the lift & curl cylinders.

Lift cylinders:
Bore 2.000"
Closed length 23" (center of eye to center of eye)
Extended length 40"
Eye diameters (pin holes) 5/8"
Width of eye tubes 1 3/4"
Ram diameter 1 1/8"
Body diameter 2 3/8"

Curl cylinders:
All dimensions the same except for closed & extended lengths:
Closed length 17"
Extended length 28"

New member with a 79' B7100 with FEL rebuilt cylinders once and doing the rt. lift for the second time today. might be intrested in replacement of all 4 if replacements can be found without too much trouble.
Keep us posted.

 

[TheOldHokie]

New member with a 79' B7100 with FEL rebuilt cylinders once and doing the rt. lift for the second time today. might be intrested in replacement of all 4 if replacements can be found without too much trouble.
Keep us posted.

Replacement is just a matter of spending a bit under $800.

Dan

 

[Mallis_dad]

Replacement is just a matter of spending a bit under $800.

Dan

Can you post which cylinders you used? And where you purchased?

 

[TheOldHokie]

Can you post which cylinders you used? And where you purchased?

I have a B1630 loader. Is that what ypu have?

Dan

 

[Mallis_dad]

I have a B1630 loader. Is that what ypu have?

Dan

Unfortunately no I actually have a B219 and my B7100 has 1150 hrs on the clock. Heck I just went up to OH and got a set of ROPS for it.

 

[North Idaho Wolfman]

Unfortunately no I actually have a B219 that has 1150 hrs on the clock. Heck I just went up to OH and got a set of ROPS for it.

Do you know what ROPS means?