So i got a MX5100 with a bucket/FEL.
I am needing to cut a little trench to drain off some water from a low spot i created digging out some dirt so my newly installed fence gate would swing clear. Its a 8' wide gate. Now I got a little pond right in front of the gate. The ground runs down towards the gate.
I was thinking of cutting a trench from the low spot /pond I created and put a pipe or some kind of that black corrugated pipe in the trench so it has some fall to it to take the water away. No back hoe and for 10K I'm not buying one to cut one trench.
Anyone ever use there bucket to do this? Ground is real soft right now with all the rain we're getting. Any thoughts/tips/tricks or just a dumb Idea. Son in law has a little back hoe but no trailer to transport it yet anyway. He's too far to drive it over on the road. Any Idea's? besides move the gate? Really don't want to do that, Meaning the wife wants it where its at of course.
I am needing to cut a little trench to drain off some water from a low spot i created digging out some dirt so my newly installed fence gate would swing clear. Its a 8' wide gate. Now I got a little pond right in front of the gate. The ground runs down towards the gate.
I was thinking of cutting a trench from the low spot /pond I created and put a pipe or some kind of that black corrugated pipe in the trench so it has some fall to it to take the water away. No back hoe and for 10K I'm not buying one to cut one trench.
Anyone ever use there bucket to do this? Ground is real soft right now with all the rain we're getting. Any thoughts/tips/tricks or just a dumb Idea. Son in law has a little back hoe but no trailer to transport it yet anyway. He's too far to drive it over on the road. Any Idea's? besides move the gate? Really don't want to do that, Meaning the wife wants it where its at of course.
Last edited: