I fired up my G6200 today and went out to mow, forgetting that I had closed the fuel line at the sediment filter and didn't open it back up, so it ran out of fuel and shut off. I opened it up and tried starting it again, but all it would do is turn on for a second or two and shut right back off. Tried opening the bleeder screws and turning the key to the "on" position, but nothing happened. Opened up the injectors, some bubbles came out, but didn't seem to help. Cleaned out the sediment bowl and filter, filled the bowl with fresh fuel, tried bleeding again, and now the engine is not getting fuel at all. I'm really not sure what to do at this point. Any suggestions on what I should do?
To add icing to the cake the tractor is stuck outside and we're supposed to get some nasty storms the next couple days. Hopefully the tarp I have over it doesn't blow away.
To add icing to the cake the tractor is stuck outside and we're supposed to get some nasty storms the next couple days. Hopefully the tarp I have over it doesn't blow away.
Last edited: