Hi All,
Ive had a B7000 for some time and its been a great little tractor, im now adding a FEL to it and a couple of questions before i go headlong into it.
There is no diverter valve under the seat, only what appears to be an outlet.
There is no block near the cylinder to add the diverter plate onto it.
If i take the high pressure line and cut into it, with the IN on the FEL coming from the pump side, and the PB from the FEL to the other side, an then the OUT from teh FEL into the top of the gearbox filler is this the recommended way ?
in effect putting the FEL inline with the existing high pressure pipe
pump>FEL IN...FEL PB > to 3PH line
FEL OUT > Gearbox filler.
Ive had a B7000 for some time and its been a great little tractor, im now adding a FEL to it and a couple of questions before i go headlong into it.
There is no diverter valve under the seat, only what appears to be an outlet.
There is no block near the cylinder to add the diverter plate onto it.
If i take the high pressure line and cut into it, with the IN on the FEL coming from the pump side, and the PB from the FEL to the other side, an then the OUT from teh FEL into the top of the gearbox filler is this the recommended way ?
in effect putting the FEL inline with the existing high pressure pipe
pump>FEL IN...FEL PB > to 3PH line
FEL OUT > Gearbox filler.