Search results

Here is a few pictures of my restoration I just finished up. I bought it not running for almost 3 years and busted steering. After new starter, injection pump rebuild and new governor springs I got it running. And the sector shaft had broken teeth in the steering box. I also ripped out the...

I am in the process of putting my l245dt project back together and the bolts that holds the brace for the FEL to the bottom of the chassis keep coming loose. I figured there was a reason there was no bolts in it when I took the tractor apart. And someone previously welded the back of the loader...

Trying to figure out why the 4wd is not working on my l245dt. When I jack the front end off the ground and turn one wheel by hand the other front wheel will not spin when the lever is in 4wd or 2wd, and its the same for both sides. I cannot see if the driveshaft is turning or not because it is...

I finally got my new starter for my new to me l245dt. I bought it not running a couple weeks ago and hadn't been started for almost 3 years. It started up without too much trouble using the glow plugs it would start and stall after a few seconds and eventually got it to stay running. However it...

I'm trying to find the shut off on my l245. The previous owner could not remember how to. In the manual it shows a shut off arm near the injection pump but I cannot find it and there is no pull cable on the dash. I found what looks like a solenoid that has the wires cut off it which I'm not sure...

I recently bought a L245dt, and the starter solenoid is bad. I can jump the large solenoid posts and the motor will turn, but when I put 12+ on the small solenoid terminal it will not do anything. however the soft copper lead from the motor to the load side of the solenoid has most of the strand...

I am looking at purchasing my first tractor, Its a L245dt with a FEL and cab with just over 2300 hours. The owner broke the steering 3 winters ago and has not run it since. I have read the steering boxes failing is fairly common with these, however to remove the steering box it appears I will...